Agriculture / Farm Tractors / John Deere / 6155M

Ship a John Deere 6155M farm tractor: specs verified, rate in 60 seconds

The John Deere 6155M measures 15 ft 5 in long, 8 ft 4 in wide and 9 ft 5 in high at 13,073 lbs (4.70 m × 2.54 m × 2.87 m, 5,930 kg). It rides legal on a lowboy or RGN with no permits expected. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 15 ft 5 in · 4.70 mW 8 ft 4 in · 2.54 mH 9 ft 5 in · 2.87 mWt 13,073 lbs · 5,930 kg

Pre-filled from verified specs (2026-10-31). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

✓ Good news for your budget: ships legal on a lowboy or RGN. No permits, no escorts, no oversize surcharges expected.

Before you book: what shippers ask

What trailer does a John Deere 6155M need?

Step deck or a lowboy or RGN. At 9 ft 5 in tall the machine sits at 10 ft 11 in on an RGN deck and 14 ft 5 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a John Deere 6155M need oversize permits?

No. At 8 ft 4 in travel width and 13,073 lbs it rides legal on the right deck; no permits, escorts or oversize surcharges are expected.

Can a John Deere 6155M be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a John Deere 6155M for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a John Deere 6155M?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this farm tractor ships

1. Equipment match: Step deck · Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: none expected
4. Season: no seasonal weight sensitivity at this weight

Operational specs

Published manufacturer figures for the base unit (LoadLoom equipment library, 2026-11-01); transport dimensions above remain the planning figures.

Engine

Engine Manufacturer: John Deere PowerTech? PSS (B20 Diesel Compatible)
Cylinder Liners: Wet sleeve
Fuel Tank Capacity: 78 gal
Displacement: 414 cu in
Aspiration: Dual Series Turbocharger w/fixed geometry first stage-variable geometry second stage - air-to-air aftercooling and cooled exhaust gas recirculation
Underhood Muffler: Yes

Power Take-Off(Pto)

Standard: Independent 1-3/8 in., 540/1000 reversible shaft
Optional: Independent 540 rpm
Pto Actuation: Electrohydraulic

Performance

Advertised Pto: \"91 @ 2100 kW 123 @ 2100 hp\"
Advertised Engine Hp (Kw) @ Rated Speed: \"116 @ 2100 kW 155 @ 2100 hp\"

Transmission

Standard Transmission; Forward/Reverse: 16 Speed PowrQuad Transmission 30K (OOS Only); 16 Speed PowrQuad PLUS? Transmission 30K (Cab Only)
Clutch, Wet/Dry: Wet
Creeper: Yes
Reverser: Left-hand base
On-The-Go Shifting (Yes/No/Partial): Yes

Tires

2wd: 10.00-16 10PR F2 Bias - Front in. 460/85R38 149A8 R1W Radial - Rear in.
Mfwd: Front 380/85R28 133A8 R1W Radial in.Rear 460/85R38 149A8 R1W Radial in.

Hydraulic

Pump Rated Output 1: 30 gal/min
Maximum Operating Pressure: 2900 psi
Remote Control Valves Available: Up to 3 rear mechanical or 3 with power beyond, 3 mid-mount mechanical
Hitch Draft Control Load Sense Type: Electrohydraulic
Hitch Category (Sae Designation): Category 2/3N
Sensing Type: Electronic lower link
Joystick Scv Control: Mechanical
Hydraulic Type: Pressure & Flow Compensated (PFC) System with Load Sensing Function

Final Drive

Final Drive Type: Inboard planetary three pinion
Differential Controls: Electrohydraulic
Availability: \"Front YesFront & Rear Yes\"
Engage On-The-Go Rear Differential Lock: Yes
Brakes, Type And Control: Hydraulic wet disk

Operator Station

Rollover Protective Structure: Gearshift Location - Console/Floor Transmission specific Yes

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Allis Chalmers Allis-Chalmers 7020 10,820 lbs
Allis Chalmers Allis-Chalmers 7030 12,430 lbs
Allis Chalmers D21 11,700 lbs
Allis Chalmers D21IIINDUSTRIAL 10,675 lbs
Bell 1226 12,790 lbs
Bell 1226F 14,130 lbs

More John Deere models

John Deere 1010 Backhoe Loaders
John Deere 1010CLR Crawler Loaders
John Deere 1010D Four-Wheel Long Frame Forwarders
John Deere 1010D Four-Wheel Short Frame Forwarders
John Deere 1010D Six-Wheel Forwarders
John Deere 1010DFWRDR Wheel Loaders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.