Construction / Articulated Dump Trucks / Caterpillar / 730C

Ship a Caterpillar 730C articulated dump truck: specs verified, rate in 60 seconds

The Caterpillar 730C measures 34 ft 8 in long, 9 ft 8 in wide and 12 ft 5 in high at 53,131 lbs (10.57 m × 2.95 m × 3.78 m, 24,100 kg). It is an oversize load (oversize permit); permits and escorts are priced into the rate automatically. Enter your route below; the dimensions are already in the form.

How this articulated dump truck ships

1. Equipment match: Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: oversize permit, escorts none expected
4. Season: weight-sensitive in spring thaw: rural pickups in Canada and the northern US may face road bans March to May, priced automatically

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 34 ft 8 in · 10.57 mW 9 ft 8 in · 2.95 mH 12 ft 5 in · 3.78 mWt 53,131 lbs · 24,100 kg

Pre-filled from verified specs (2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

Oversize load, and what that means for your shipment. At 9 ft 8 in wide this machine exceeds the 8 ft 6 in legal limit on every route. Your rate includes the right trailer, permits and escorts (none expected), priced automatically, nothing added at pickup.

Before you book: what shippers ask

What trailer does a Caterpillar 730C need?

A lowboy or RGN. At 12 ft 5 in tall the machine sits at 13 ft 11 in on an RGN deck and 17 ft 5 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Caterpillar 730C need oversize permits?

Yes. 9 ft 8 in of travel width exceeds the 8 ft 6 in legal limit; the quote prices permits for every state or province crossed, escorts none expected, and files them for the carrier.

Can a Caterpillar 730C be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Caterpillar 730C for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Caterpillar 730C?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

Operational specs

Published manufacturer figures for the base unit (LoadLoom equipment library, 2026-11-01); transport dimensions above remain the planning figures.

Engine

Engine Make: 2236
Engine Model: C13
Gross Power: 375 hp
Net Power: 367 hp
Max Torque: 1579 lb ft
Torque Measured @: 1200 rpm
Displacement: 763 cu in
Bore: 5.2 in

Operational

Fuel Capacity: 108.8 gal
Hydraulic System Fluid Capacity: 29.1 gal
Cooling System Fluid Capacity: 21.9 gal
Transmission Fluid Capacity: 9.2 gal

Transmission

Number Of Forward Gears: 6
Number Of Reverse Gears: 1
Forward - 1: 5 mph
Forward - 2: 9 mph
Forward - 3: 14 mph
Forward - 4: 21 mph
Forward - 5: 29 mph
Forward - 6: 34 mph

Steering

Lock To Lock: 4.75 seconds @ 60 rpm

Weights

Front Axle - Empty: 33091 lb
Center Axle - Empty: 10384 %
Rear Axle - Empty: 9656 lb
Front Axle - Loaded: 7231 %
Center Axle - Loaded: 27249 %
Rear Axle - Loaded: 27249 lb
Total Empty: 53131 lb
Total Loaded: 61729 lb

Service Refill Capacities

Cooling System: 21.9 gal
Fuel Tank: 108.8 gal
Engine Crankcase: 10.5 gal
Transmission: 9.2 gal
Hydraulic System: 29.1 gal
Final Drives/Differential: 35.7 gal
Output Transfer Gear Box: 6.3 gal
Def Tank (Iso 2224-1): 5.3 gal

Standards

Cab - Fops: ISO 3449 Level II - 2005
Cab - Rops: ISO 3471 - 2008
Brakes: ISO 3450 - 2011
Steering: ISO 5010 - 2007

Operating Weights

Front Axle - Empty: 33091 lb
Center Axle - Empty: 10384 lb
Rear Axle - Empty: 9656 lb
Total - Empty: 53131 lb
Front Axle - Rated Load: 7231 lb
Center Axle - Rated Load: 27249 lb
Rear Axle - Rated Load: 27249 lb
Total - Rated Load: 61729 lb

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Atlas Copco MT2010 45,195 lbs
Atlas Copco MT431B 61,730 lbs
Bell B35C 57,099 lbs
Bell B35D 58,940 lbs
Bell B40C 63,493 lbs
Bell B40D 63,603 lbs

More Caterpillar models

Caterpillar 10 Crawler Tractors
Caterpillar 1055D Pavers
Caterpillar 112 Motor Graders
Caterpillar 11268E Motor Graders
Caterpillar 112E Motor Graders
Caterpillar 112E72H Motor Graders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.