Construction / Articulated Dump Trucks / Caterpillar / 745

Ship a Caterpillar 745 articulated dump truck: specs verified, rate in 60 seconds

The Caterpillar 745 measures 37 ft 11 in long, 11 ft 1 in wide and 12 ft 5 in high at 73,553 lbs (11.56 m × 3.38 m × 3.78 m, 33,363 kg). It is an oversize load (oversize permit); permits and escorts are priced into the rate automatically. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 37 ft 11 in · 11.56 mW 11 ft 1 in · 3.38 mH 12 ft 5 in · 3.78 mWt 73,553 lbs · 33,363 kg

Verified against the manufacturer's published specifications (source, 2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

Oversize load, and what that means for your shipment. At 11 ft 1 in wide this machine exceeds the 8 ft 6 in legal limit on every route. Your rate includes the right trailer, permits and escorts (none expected), priced automatically, nothing added at pickup.

Before you book: what shippers ask

What trailer does a Caterpillar 745 need?

A lowboy or RGN. At 12 ft 5 in tall the machine sits at 13 ft 11 in on an RGN deck and 17 ft 5 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Caterpillar 745 need oversize permits?

Yes. 11 ft 1 in of travel width exceeds the 8 ft 6 in legal limit; the quote prices permits for every state or province crossed, escorts none expected, and files them for the carrier.

Can a Caterpillar 745 be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Caterpillar 745 for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Caterpillar 745?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this articulated dump truck ships

1. Equipment match: Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: oversize permit, escorts none expected
4. Season: weight-sensitive in spring thaw: rural pickups in Canada and the northern US may face road bans March to May, priced automatically

Operational specs

Published manufacturer figures for the base unit (Caterpillar's published specifications, source, 2026-11-01); transport dimensions above remain the planning figures.

Engine

Engine Model: Cat® C18
Gross Power (SAE J1995): 511 hp
Net Power (SAE J1349): 496 hp
Engine Power (ISO 14396): 504 hp
Bore: 5.7 in
Stroke: 7.2 in
Displacement: 1106 in³
No Engine De-rating Required Below: 10000 ft

Weights

Rated Payload: 45.2 t

Body Capacities

Heaped (SAE 2:1): 33.4 yd³
Struck: 26 yd³
Tailgate Heaped SAE 2:1: 35.7 yd³
Tailgate Struck: 27.3 yd³

Air Conditioning System

Air Conditioning: The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system contains 1.2 kg (2.4 lb) of refrigerant which has a CO2 equivalent of 1.716 metric tonnes (1.891 tons).

Transmission

Forward - 1: 3.8 mile/h
Forward - 2: 5 mile/h
Forward - 3: 7 mile/h
Forward - 4: 8.8 mile/h
Forward - 5: 11.6 mile/h
Forward - 6: 14.2 mile/h
Forward - 7: 19.6 mile/h
Forward - 8: 23.5 mile/h

Sound Levels

Interior Cab: 72 dB(A)

Operating Weights

Front Axle - Empty: 42285 lb
Center Axle - Empty: 15653 lb
Rear Axle - Empty: 15058 lb
Total - Empty: 72995 lb
Front Axle - Rated Load: 12963 lb
Center Axle - Rated Load: 38713 lb
Rear Axle - Rated Load: 38713 lb
Total - Rated Load: 90389 lb

Body Plate

Type: High Strength Brinell HB450 Wear Resistant Steel
Front: 0.28 in
Chute: 0.55 in
Side: 0.43 in
Base: 0.55 in

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Atlas Copco EMT35 66,000 lbs
Atlas Copco MT42 76,060 lbs
Atlas Copco MT431B 61,730 lbs
Atlas Copco MT436B 67,462 lbs
Atlas Copco MT436LP 67,462 lbs
Bell B35D 58,940 lbs

More Caterpillar models

Caterpillar 10 Crawler Tractors
Caterpillar 1055D Pavers
Caterpillar 112 Motor Graders
Caterpillar 11268E Motor Graders
Caterpillar 112E Motor Graders
Caterpillar 112E72H Motor Graders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.