Construction / Articulated Dump Trucks / Komatsu / HM3002

Ship a Komatsu HM3002 articulated dump truck: specs verified, rate in 60 seconds

The Komatsu HM3002 measures 34 ft 3 in long, 9 ft 6 in wide and 11 ft 7 in high at 50,000 lbs (10.44 m × 2.90 m × 3.53 m, 22,680 kg). It is an oversize load (oversize permit); permits and escorts are priced into the rate automatically. Enter your route below; the dimensions are already in the form.

How this articulated dump truck ships

1. Equipment match: Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: oversize permit, escorts none expected
4. Season: weight-sensitive in spring thaw: rural pickups in Canada and the northern US may face road bans March to May, priced automatically

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 34 ft 3 in · 10.44 mW 9 ft 6 in · 2.90 mH 11 ft 7 in · 3.53 mWt 50,000 lbs · 22,680 kg

Pre-filled from verified specs (2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

Oversize load, and what that means for your shipment. At 9 ft 6 in wide this machine exceeds the 8 ft 6 in legal limit on every route. Your rate includes the right trailer, permits and escorts (none expected), priced automatically, nothing added at pickup.

Before you book: what shippers ask

What trailer does a Komatsu HM3002 need?

A lowboy or RGN. At 11 ft 7 in tall the machine sits at 13 ft 1 in on an RGN deck and 16 ft 7 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Komatsu HM3002 need oversize permits?

Yes. 9 ft 6 in of travel width exceeds the 8 ft 6 in legal limit; the quote prices permits for every state or province crossed, escorts none expected, and files them for the carrier.

Can a Komatsu HM3002 be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Komatsu HM3002 for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Komatsu HM3002?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

Operational specs

Published manufacturer figures for the base unit (LoadLoom equipment library, 2026-11-01); transport dimensions above remain the planning figures.

Steering System

Steering System Type: Articulated type, fully hydraulic power steering with two double-acting cylinders
Supplementary Steering: Automatically actuated electrically powered
Minimum Turning Radius, Wall To Wal: 7.96 m 26\'1\"
Articulation Angle: 45°each direction

Electrical System

Alternator: 24V, 75 Ah.
Batteries: 12V, 136 Ah x 2.
Starter Motor: 24V, 11.0 kW.

Suspension System

Rear: Combined hydro-pneumatic and rubber suspension system
Front: Hydro-pneumatic suspension

Main Frame

Main Frame Type: Articulated type, box-sectioned construction on front and rear Connected by strong torque tubes.

Body

Capacity Struck: 16.9 yd3
Heaped (2:1, Sae): 21.7 yd3
Payload: 27.3 metric tons 30.1 U.S. tons
Material: 130 kg/mm2 184,925 psi high tensile strength steel
Material Thickness-Bottom: 0.6 in
Material Thickness-Front: 0.4 in
Material Thickness-Sides: 0.5 in
Target Area: 5240 mm x 2685 mm 17\'2\" x 8\'10\"

Engine

Number Of Cylinders: 6
Engine Make: 0
Engine Model: Komatsu SAA6D125E-5
Engine Type: Water-cooled, 4-cycle
Gross Power: 340 hp
Lubrication: Method- Gear pump, force-lubrication Filter-Full-flow type
Air Cleaner: Dry type with double elements and precleaner (cyclonpack type), plus dust indicator EPA Tier 3 and EU Stage 3A emissions certified
Governor: Electronically controlled

Capacities

Fuel Tank - Diesel: 101.5 gal
Final Drive: 6.3 gal
Hydraulic System: 31.7 gal
Engine Oil: 9.8 gal
Torque Converter, Transmission And Retarder Cooling: 20.5 gal
Differentials: 16.8 gal
Suspension: 2.7 gal

Transmission

Travel Speed: 36.4 mph
Torque Converter: 3-elements, 1-stage, 2-phase
Transmission: Full-automatic, counter-shaft type
Speed Range: 6 speeds forward and 2 reverse
Lockup Clutch: Wet, single-disk clutch
Forward: Torque converter drive in 1st gear, direct drive in 1st lockup and all higher gears
Reverse: Torque converter drive and direct drive in all gear
Shift Control: Electronic shift control with automatic clutch modulation in all gear

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Atlas Copco MT2010 45,195 lbs
Bell B25E 41,365 lbs
Bell B30C 40,124 lbs
Bell B30E 42,365 lbs
Bell B35C 57,099 lbs
Bell B35D 58,940 lbs

More Komatsu models

Komatsu 25 Forklifts Cushion Tire
Komatsu 380 Farm Tractors
Komatsu 425EXL Feller Bunchers
Komatsu 430FXL Feller Bunchers
Komatsu 445FXL Feller Bunchers
Komatsu 830.3 Forwarders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.