Construction / Backhoe Loaders / Caterpillar / 415F2

Ship a Caterpillar 415F2 backhoe loader: specs verified, rate in 60 seconds

The Caterpillar 415F2 measures 23 ft 6 in long, 7 ft 7 in wide and 11 ft 11 in high at 24,251 lbs (7.16 m × 2.31 m × 3.63 m, 11,000 kg). It rides legal on a lowboy or RGN with no permits expected. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 23 ft 6 in · 7.16 mW 7 ft 7 in · 2.31 mH 11 ft 11 in · 3.63 mWt 24,251 lbs · 11,000 kg

Pre-filled from verified specs (2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

✓ Good news for your budget: ships legal on a lowboy or RGN. No permits, no escorts, no oversize surcharges expected.

Before you book: what shippers ask

What trailer does a Caterpillar 415F2 need?

A lowboy or RGN. At 11 ft 11 in tall the machine sits at 13 ft 5 in on an RGN deck and 16 ft 11 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Caterpillar 415F2 need oversize permits?

No. At 7 ft 7 in travel width and 24,251 lbs it rides legal on the right deck; no permits, escorts or oversize surcharges are expected.

Can a Caterpillar 415F2 be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Caterpillar 415F2 for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Caterpillar 415F2?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this backhoe loader ships

1. Equipment match: Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: none expected
4. Season: no seasonal weight sensitivity at this weight

Operational specs

Published manufacturer figures for the base unit (LoadLoom equipment library, 2026-11-01); transport dimensions above remain the planning figures.

Engine

Displacement: 207 cu in
Bore: 3.9 in
Stroke: 4.4 in
Net Power - Sae J1349: 68 hp
Gross Power - Sae J1995: 74 hp
Engine Model: Cat C3.4B
Rated Net Power - Iso 9249: 68 hp
Gross Power - Iso 14396: 74 hp

Steering

Steering Type: Front Wheel
Power Steering: Hydrostatic
Bore: 2.6 in
Stroke: 4.7 in
Rod Diameter: 1.4 in
Axle Oscillation: 11 degrees
Turning Circle - 2wd/Awd (Inner Wheel Not Braked) - Outside Front Wheels: 26.8 ft in
Turning Circle - 2wd/Awd (Inner Wheel Not Braked) - Outside Widest Loader Bucket: 36 ft in

Transmission

Power Shuttle Transmission - Forward 1st: 3.4 mph
Power Shuttle Transmission - Forward 2nd: 5.5 mph
Power Shuttle Transmission - Forward 3rd: 12 mph
Power Shuttle Transmission - Forward 4th: 23 mph
Power Shuttle Transmission - Reverse 1st: 3.4 mph
Power Shuttle Transmission - Reverse 2nd: 5.5 mph
Power Shuttle Transmission - Reverse 3rd: 12 mph
Power Shuttle Transmission - Reverse 4th: 23 mph

Weights

Operating Weight - Maximum: 24251 lb
Cab - Rops/Fops: 359 lb
Counterweights - Option 1: 255 lb
Counterweights - Option 2: 530 lb
Counterweights - Option 3: 1015 lb
Operating Weight - Minimum: 15207 lb
Air Conditioning: 101 lb
Four Wheel Drive: 392 lb

Tires

Choice 5: Front: 340-80R18 143B R-4; Rear: 500/70R24 157B, R-4
Choice 1: Front: 11L-16 (12 ply) F-3; Rear: 19.5L-24 (12 ply) R4 ATU
Choice 2: Front: 12.5/80-18-1810 PR I-3; Rear: 19.5L-24 12 PR R4
Choice 3: Front: 12-16.5 (10 ply); Rear: 19.5L-24 (12 ply) ATU
Choice 4: Front: 12-16.5 (12 ply); Rear: 19.5L-24 (12 ply) ATU, 20 PITCH
Choice 6: Front: 340-80R18 143B R-4; Rear: 19.5L-24, 12, ATU
Choice 7: Front: 340/80R18 XMCL 142A8; Rear: 500.70R24 XMCL 157A8

Hydraulic System

Pump Type: Variable Flow, Axial Piston
Hydraulic System Type: Closed Center
Pump Capacity At 2,200 Rpm: 35 gal/min
System Pressure - Loader: 3336 psi
System Pressure - Backhoe: 3336 psi

Brakes

Feature (1): Brakes meet the following standards: SAE J1473 and ISO 3450 requirements.
Feature (2): Self-adjusting, completely enclosed and sealed.
Feature (3): Foot operated brake pedals can be interlocked for roading.
Feature (4): Parking/secondary brakes are independent of the service brake system.
Feature (5): Parking brake is mechanically applied through an adjustable hand lever located on the right console.

Service Refill Capacities

Fuel Tank: 42 gal
Hydraulic Tank: 10.6 gal
Note: Requires ultra-low sulfur fuel less than or equal to 15 ppm fuel sulfur.
Hydraulic System: 23.8 gal
Rear Axle: 4.4 gal
Engine Oil - With Filter: 2.3 gal
Transmission - Power Shuttle - 4wd: 4 gal
Rear Axle - Planetaries: 0.4 gal

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Case 580 Super N WT 19,985 lbs
Case 580SN 20,000 lbs
Case 590 Super N 20,458 lbs
Caterpillar 416E 22,466 lbs
Caterpillar 416F 24,251 lbs
Caterpillar 416F2 24,251 lbs

More Caterpillar models

Caterpillar 10 Crawler Tractors
Caterpillar 1055D Pavers
Caterpillar 112 Motor Graders
Caterpillar 11268E Motor Graders
Caterpillar 112E Motor Graders
Caterpillar 112E72H Motor Graders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.