Construction / Backhoe Loaders / MST / M544

Ship a MST M544 backhoe loader: specs verified, rate in 60 seconds

The MST M544 measures 18 ft 7 in long, 7 ft 11 in wide and 12 ft 4 in high at 19,290 lbs (5.66 m × 2.41 m × 3.76 m, 8,750 kg). It is an oversize load (oversize permit); permits and escorts are priced into the rate automatically. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 18 ft 7 in · 5.66 mW 7 ft 11 in · 2.41 mH 12 ft 4 in · 3.76 mWt 19,290 lbs · 8,750 kg

Pre-filled from verified specs (2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

Oversize load, and what that means for your shipment. Loaded height exceeds the legal limit on every deck. Your rate includes the right trailer, permits and escorts (none expected), priced automatically, nothing added at pickup.

Before you book: what shippers ask

What trailer does a MST M544 need?

A lowboy or RGN. At 12 ft 4 in tall the machine sits at 13 ft 10 in on an RGN deck and 17 ft 4 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a MST M544 need oversize permits?

Yes. The loaded height exceeds the legal limit even on an RGN; the quote prices permits for every state or province crossed, escorts none expected, and files them for the carrier.

Can a MST M544 be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a MST M544 for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a MST M544?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this backhoe loader ships

1. Equipment match: Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: oversize permit, escorts none expected
4. Season: no seasonal weight sensitivity at this weight

Operational specs

Published manufacturer figures for the base unit (LoadLoom equipment library, 2026-11-01); transport dimensions above remain the planning figures.

Engine

Number Of Cylinders: 4
Engine Make: 2351
Engine Model: 1104C-44T
Gross Power: 99 hp
Power Measured @: 2200 rpm
Torque Measured @: 1350 rpm
Net Max Torque: 306.1 lb ft
Displacement: 268.6 cu in

Operational

Operating Weight 2wd: 19290.5 lb
Fuel Capacity: 27.8 gal
Hydraulic System Fluid Capacity: 40.2 gal
Oil System Fluid Capacity: 2.2 gal
Cooling System Fluid Capacity: 6.9 gal
Front Axle Fluid Capacity: 2.3 gal
Rear Axle Fluid Capacity: 3.5 gal
Turning Radius: 17.3 ft in

Transmission

Transmission Type: Auto Powershift, low speed gearbox
Number Of Forward Gears: 4
Number Of Reverse Gears: 4
Max Speed - Forward: 26.1 mph

Hydraulic

Pump Type: Helical gear type tandem pump
Pump Flow Capacity: 41 gal/min
Relief Valve Pressure: 3626 psi

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Case 580 Super N 16,239 lbs
Case 580 Super N WT 19,985 lbs
Case 580NEP 18,000 lbs
Case 580SMPLUSII 17,545 lbs
Case 580SN 20,000 lbs
Case 590 Super N 20,458 lbs

More MST models

More models land as the specs database grows.
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.