Construction / Compactors / Caterpillar / 815

Ship a Caterpillar 815 compactor: specs verified, rate in 60 seconds

The Caterpillar 815 measures 22 ft 5 in long, 12 ft 0 in wide and 12 ft 0 in high at 40,058 lbs (6.83 m × 3.66 m × 3.66 m, 18,170 kg). It is an oversize load (oversize permit); permits and escorts are priced into the rate automatically. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 22 ft 5 in · 6.83 mW 12 ft 0 in · 3.66 mH 12 ft 0 in · 3.66 mWt 40,058 lbs · 18,170 kg

Verified against the manufacturer's published specifications (source, 2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

Oversize load, and what that means for your shipment. At 12 ft 0 in wide this machine exceeds the 8 ft 6 in legal limit on every route. Your rate includes the right trailer, permits and escorts (likely one escort), priced automatically, nothing added at pickup.

Before you book: what shippers ask

What trailer does a Caterpillar 815 need?

A lowboy or RGN. At 12 ft 0 in tall the machine sits at 13 ft 6 in on an RGN deck and 17 ft 0 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Caterpillar 815 need oversize permits?

Yes. 12 ft 0 in of travel width exceeds the 8 ft 6 in legal limit; the quote prices permits for every state or province crossed, escorts likely one escort, and files them for the carrier.

Can a Caterpillar 815 be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Caterpillar 815 for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Caterpillar 815?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this compactor ships

1. Equipment match: Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: oversize permit, escorts likely one escort
4. Season: weight-sensitive in spring thaw: rural pickups in Canada and the northern US may face road bans March to May, priced automatically

Operational specs

Published manufacturer figures for the base unit (Caterpillar's published specifications, source, 2026-11-01); transport dimensions above remain the planning figures.

Engine

Gross Power (SAE J1995:2014): 284 hp
Net Power (SAE J1349:2011): 249 hp
Net Power (ISO 9249:2007): 249 hp
Engine Power (ISO 14396:2002): 275 hp
Emissions: Option 1 - U.S. EPA Tier 4 Final/EU Stage V
Engine Model: Cat® C7.1
Rated Speed: 2200 r/min
Torque Rise: 52%

Operating Specifications

Operating Weight (Tier 4 Final/Stage V): 49652 lb
Operating Weight (Tier 3/Stage IIIA equivalent): 49013 lb

Transmission

Transmission Type: Cat Planetary Power Shift
Travel Speeds - Forward - First: 3.9 mile/h
Travel Speeds - Forward - Second: 6.7 mile/h
Travel Speeds - Forward - Third: 11.3 mile/h
Travel Speeds - Reverse - First: 4.5 mile/h
Travel Speeds - Reverse - Second: 7.7 mile/h
Travel Speeds - Reverse - Third: 11.4 mile/h

Hydraulic System - Lift/Tilt

Lift/Tilt System - Circuit: Pilot operated Load Sensing valve with EH
Lift/Tilt System: Variable displacement piston
Maximum Flow at 2,200 rpm: 23.5 gpm
Relief Valve Setting - Lift/Tilt: 3190 psi
Cylinders, Double Acting: Lift, Bore, Stroke: 101.6 mm x 627 mm (4 in x 24.7 in)
Cylinders, Double Acting: Left and Right Tilt, Bore, Stroke: 101.6 mm x 167 mm (4 in x 6.6 in)
Pilot System: Open center, fixed displacement gear
Pilot Relief Valve Setting: 3046 psi

Hydraulic System - Steering

Steering System - Circuit: Pilot, Load Sensing
Steering System - Pump: Piston – Variable Displacement
Maximum Flow at 2,200 rpm: 38.8 gpm
Relief Valve Setting - Steering: 4003 psi
Total Steering Angle: 84°
Steering Cycle Times - High Idle: 3 s
Steering Cycle Times - Low Idle: 8.2 s

Service Refill Capacities

Fuel Tank: 132.1 gal (US)
Diesel Exhaust Fluid Tank: 4.2 gal (US)
Cooling Systems - Tier 4 Final/EU Stage V: 21.4 gal (US)
Cooling System - Tier 3/Stage IIIA Equivalent: 19.3 gal (US)
Engine Crankcase: 5.3 gal (US)
Transmission: 14.8 gal (US)
Differential - Final Drives - Front: 17.2 gal (US)
Differential - Final Drives - Rear: 17.2 gal (US)

Axles

Front: Planetary – Fixed
Rear: Planetary – Oscillating
Oscillation Angle: ±10

Braking System

Service Brakes: Single Disc Wet (Enclosed) 2 WHL
Parking Brake: Drum and Shoe, Spring Applied, Hydraulic Released

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Allen 820 36,000 lbs
Allen 820SFP 44,000 lbs
Amman AC1602 36,300 lbs
Amman AC1902 42,900 lbs
Ammann ASC150HD 34,414 lbs
Ammann ASC150HDPD 34,227 lbs

More Caterpillar models

Caterpillar 10 Crawler Tractors
Caterpillar 1055D Pavers
Caterpillar 112 Motor Graders
Caterpillar 11268E Motor Graders
Caterpillar 112E Motor Graders
Caterpillar 112E72H Motor Graders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.