Construction / Compactors / Caterpillar / CS10GC

Ship a Caterpillar CS10GC compactor: specs verified, rate in 60 seconds

The Caterpillar CS10GC measures 18 ft 8 in long, 7 ft 7 in wide and 9 ft 10 in high at 23,136 lbs (5.69 m × 2.31 m × 3.00 m, 10,494 kg). It rides legal on a lowboy or RGN with no permits expected. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 18 ft 8 in · 5.69 mW 7 ft 7 in · 2.31 mH 9 ft 10 in · 3.00 mWt 23,136 lbs · 10,494 kg

Verified against the manufacturer's published specifications (source, 2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

✓ Good news for your budget: ships legal on a lowboy or RGN. No permits, no escorts, no oversize surcharges expected.

Before you book: what shippers ask

What trailer does a Caterpillar CS10GC need?

Step deck or a lowboy or RGN. At 9 ft 10 in tall the machine sits at 11 ft 4 in on an RGN deck and 14 ft 10 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Caterpillar CS10GC need oversize permits?

No. At 7 ft 7 in travel width and 23,136 lbs it rides legal on the right deck; no permits, escorts or oversize surcharges are expected.

Can a Caterpillar CS10GC be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Caterpillar CS10GC for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Caterpillar CS10GC?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this compactor ships

1. Equipment match: Step deck · Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: none expected
4. Season: no seasonal weight sensitivity at this weight

Operational specs

Published manufacturer figures for the base unit (Caterpillar's published specifications, source, 2026-11-01); transport dimensions above remain the planning figures.

Weights

Operating Weight - With Cab: 23136 lb
Operating Weight - With ROPS/FOPS Canopy: 22796 lb
Weight - Drum with Cab: 12948 lb
Weight - Drum with ROPS/FOPS Canopy: 12853 lb

Dimensions

Compaction Width: 84 in
Overall Length: 18.7 ft
Overall Width: 7.5 ft
Maximum Height: 9.9 ft
Drum Diameter: 60.4 in
Wheel Base: 9.8 ft

Engine

Gross Power: 122.9 hp
Engine Power - ISO 14396: 121 hp
Net Power - ISO 9249: 112.2 hp
Net Power - SAE J1349:2011: 111.2 hp
Engine Model: Cat® C3.6
Emissions: U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V
Stroke: 4.7 in
Bore: 3.9 in

Operating Specifications

Ground Clearance: 20.4 in
Curb Clearance: 19.4 in
Turning Radius - Inside Drum Edge: 12.7 ft
Travel Speed - Maximum: 6.8 mile/h

Service Refill Capacities

Fuel Tank Capacity: 56.3 gal (US)
DEF Tank: 5 gal (US)
Cooling System: 4.9 gal (US)
Engine Oil - With Filter: 3.1 gal (US)
Eccentric Weight Housings (combined): 6.9 gal (US)
Axle and Final Drives: 2.6 gal (US)
Hydraulic Tank: 6.1 gal (US)

Sustainability

Recyclability: 97%

Vibratory System

Nominal Amplitude - High: 0.079 in
Nominal Amplitude - Low: 0.039 in
Centrifugal Force - Maximum: 56200 lb
Centrifugal Force - Minimum: 33500 lb
Static Linear Load - With Cab: 154.1 lb/in
Static Linear Load - With ROPS/FOPS Canopy: 153 lb/in

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Amman AC1102 25,520 lbs
Amman AC902 21,340 lbs
Amman AV95E 19,200 lbs
Amman AV95K 19,400 lbs
Amman AV95N 20,944 lbs
Amman AV95T 20,900 lbs

More Caterpillar models

Caterpillar 10 Crawler Tractors
Caterpillar 1055D Pavers
Caterpillar 112 Motor Graders
Caterpillar 11268E Motor Graders
Caterpillar 112E Motor Graders
Caterpillar 112E72H Motor Graders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.