Construction / Compactors / Dynapac / CS142

Ship a Dynapac CS142 compactor: specs verified, rate in 60 seconds

The Dynapac CS142 measures 15 ft 10 in long, 7 ft 0 in wide and 9 ft 10 in high at 23,815 lbs (4.83 m × 2.13 m × 3.00 m, 10,802 kg). It rides legal on a lowboy or RGN with no permits expected. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 15 ft 10 in · 4.83 mW 7 ft 0 in · 2.13 mH 9 ft 10 in · 3.00 mWt 23,815 lbs · 10,802 kg

Pre-filled from verified specs (2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

✓ Good news for your budget: ships legal on a lowboy or RGN. No permits, no escorts, no oversize surcharges expected.

Before you book: what shippers ask

What trailer does a Dynapac CS142 need?

Step deck or a lowboy or RGN. At 9 ft 10 in tall the machine sits at 11 ft 4 in on an RGN deck and 14 ft 10 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Dynapac CS142 need oversize permits?

No. At 7 ft 0 in travel width and 23,815 lbs it rides legal on the right deck; no permits, escorts or oversize surcharges are expected.

Can a Dynapac CS142 be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Dynapac CS142 for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Dynapac CS142?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this compactor ships

1. Equipment match: Step deck · Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: none expected
4. Season: no seasonal weight sensitivity at this weight

Operational specs

Published manufacturer figures for the base unit (LoadLoom equipment library, 2026-11-01); transport dimensions above remain the planning figures.

Engine

Engine Make: 2347
Engine Model: B4.5 T
Gross Power: 97.9 hp
Power Measured @: 1800 rpm
Aspiration: Turbocharged

Operational

Fuel Capacity: 29.1 gal
Spray Water Capacity: 140.1 gal
Max Speed: 9.4 mph

Weights

Operating Weight - Standard: 24250.9 lb
Operating Weight - Max Ballast: 29101.1 lb
Max Static Linear Load - Drive Drum: 853.5 lb/in
Max Static Linear Load - Guide Drum: 839.2 lb/in

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Amman AC1102 25,520 lbs
Amman AC902 21,340 lbs
Amman AV95E 19,200 lbs
Amman AV95K 19,400 lbs
Amman AV95N 20,944 lbs
Amman AV95T 20,900 lbs

More Dynapac models

Dynapac A36 Compactors
Dynapac A36D Compactors
Dynapac A48 Compactors
Dynapac CA12 Compactors
Dynapac CA121 Compactors
Dynapac CA121D Compactors
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.