Construction / Compactors / Hamm / H25i VC

Ship a Hamm H25i VC compactor: specs verified, rate in 60 seconds

The Hamm H25i VC measures 21 ft 8 in long, 8 ft 4 in wide and 9 ft 9 in high at 55,149 lbs (6.60 m × 2.54 m × 2.97 m, 25,015 kg). It rides legal on a lowboy or RGN with no permits expected. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 21 ft 8 in · 6.60 mW 8 ft 4 in · 2.54 mH 9 ft 9 in · 2.97 mWt 55,149 lbs · 25,015 kg

Pre-filled from verified specs (2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

✓ Good news for your budget: ships legal on a lowboy or RGN. No permits, no escorts, no oversize surcharges expected.

Before you book: what shippers ask

What trailer does a Hamm H25i VC need?

A lowboy or RGN. At 9 ft 9 in tall the machine sits at 11 ft 3 in on an RGN deck and 14 ft 9 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Hamm H25i VC need oversize permits?

No. At 8 ft 4 in travel width and 55,149 lbs it rides legal on the right deck; no permits, escorts or oversize surcharges are expected.

Can a Hamm H25i VC be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Hamm H25i VC for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Hamm H25i VC?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this compactor ships

1. Equipment match: Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: none expected
4. Season: weight-sensitive in spring thaw: rural pickups in Canada and the northern US may face road bans March to May, priced automatically

Operational specs

Published manufacturer figures for the base unit (LoadLoom equipment library, 2026-11-01); transport dimensions above remain the planning figures.

Engine

Emissions Level: EU Stage IIIB / EPA Tier 4i
Number Of Cylinders: 6
Engine Make: DEUTZ
Engine Model: TCD 6.1 L6
Gross Power: 214.6 hp
Net Power: 214.6 hp
Power Measured @: 2300 rpm

Operational

Smooth Drum Operating Weight With Cab: 55148.7 lb
Oscillating Angle: 10 degrees
Operating Weight: 56306.1 lb
Fuel Capacity: 74 gal
Max Speed: 5 mph
Tires: EM 23.5-R25 XTLA

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Al Jon Al-Jon 5252 64,000 lbs
Allen 1227SFP 59,400 lbs
Allen 1436 49,000 lbs
Ammann ASC200 45,646 lbs
Ammann ASC200D 45,647 lbs
Ammann ASC200HD 48,292 lbs

More Hamm models

Hamm 110IVT Compactors
Hamm 12VT Compactors
Hamm 2210SSD Compactors
Hamm 2220D Compactors
Hamm 2222DS Compactors
Hamm 2310SD Compactors
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.