Construction / Crawler Loaders / Caterpillar / 963D

Ship a Caterpillar 963D crawler loader: specs verified, rate in 60 seconds

The Caterpillar 963D measures 22 ft 10 in long, 7 ft 6 in wide and 11 ft 0 in high at 44,577 lbs (6.96 m × 2.29 m × 3.35 m, 20,220 kg). It is an oversize load (oversize permit); permits and escorts are priced into the rate automatically. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 22 ft 10 in · 6.96 mW 7 ft 6 in · 2.29 mH 11 ft 0 in · 3.35 mAtt. 8 ft 7 inWt 44,577 lbs · 20,220 kg

Pre-filled from verified specs (2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

Oversize load, and what that means for your shipment. At 8 ft 7 in wide this machine exceeds the 8 ft 6 in legal limit on every route. Your rate includes the right trailer, permits and escorts (none expected), priced automatically, nothing added at pickup. Removing the attachment lets the base machine ride legal.

Before you book: what shippers ask

What trailer does a Caterpillar 963D need?

A lowboy or RGN. At 11 ft 0 in tall the machine sits at 12 ft 6 in on an RGN deck and 16 ft 0 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Caterpillar 963D need oversize permits?

Yes. 8 ft 7 in of travel width exceeds the 8 ft 6 in legal limit; the quote prices permits for every state or province crossed, escorts none expected, and files them for the carrier. Removing the attachment lets the base machine ride legal.

Can a Caterpillar 963D be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Caterpillar 963D for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Caterpillar 963D?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this crawler loader ships

1. Equipment match: Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: oversize permit, escorts none expected
4. Season: weight-sensitive in spring thaw: rural pickups in Canada and the northern US may face road bans March to May, priced automatically

Operational specs

Published manufacturer figures for the base unit (LoadLoom equipment library, 2026-11-01); transport dimensions above remain the planning figures.

Engine

Number Of Cylinders: 6
Engine Make: 2236
Engine Model: C6.6 ACERT
Net Power: 189 hp
Power Measured @: 2000 rpm
Displacement: 402.8 cu in
Bore: 4.2 in
Stroke: 5 in

Operational

Operating Weight: 44577 lb
Fuel Capacity: 105.6 gal
Cooling System Fluid Capacity: 8.3 gal
Engine Oil Capacity: 4.4 gal
Final Drive Fluid Capacity - Each: 4 gal
Hydraulic System Fluid Capacity: 23.7 gal
Static Tipping Load: 33001 lb
Breakout Force - Std Bucket: 46908 lb

Weights

Operating Weight: 44577 lb

Buckets

Capacity - General Purpose: 3.2 yd3
Bucket Width - General Purpose: 102.8 in
Capacity - Multi-Purpose: 2.6 yd3
Bucket Width - Multi-Purpose: 101.3 in

Hydraulic

Pump Type: Closed center, load sensing/piston
Pump Flow Capacity: 55.2 gal/min
Relief Valve Pressure: 3989 psi
Raise Time: 5.7 sec
Dump Time: 1.3 sec
Lower Time: 3.7 sec

Service Refill Capacities

Cooling System: 8.3 gal
Fuel Tank: 105.6 gal
Final Drive - Each: 4 gal
Hydraulic Tank: 23.7 gal
Crankcase - With Filter: 4.4 gal
Pivot Shaft: 0.5 gal

Standards

Brakes: Brakes
Rops/Fops: ROPS/FOPS
Cab: Cab

Bucket Cycle Times

Cycle Time - Dump: 1.3 s
Cycle Time - Float Down: 2.9 s
Cycle Time - Raise: 5.8 s
Cycle Time - Total: 6.4 s

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Caterpillar 953LGP 38,055 lbs
Caterpillar 963 45,000 lbs
Caterpillar 963B 53,000 lbs
Caterpillar 963BLGP 53,000 lbs
Caterpillar 963C 41,939 lbs
Caterpillar 963CLGP 40,500 lbs

More Caterpillar models

Caterpillar 10 Crawler Tractors
Caterpillar 1055D Pavers
Caterpillar 112 Motor Graders
Caterpillar 11268E Motor Graders
Caterpillar 112E Motor Graders
Caterpillar 112E72H Motor Graders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.