Construction / Crawler Tractors / Caterpillar / 834

Ship a Caterpillar 834 crawler tractor: specs verified, rate in 60 seconds

The Caterpillar 834 measures 28 ft 6 in long, 11 ft 8 in wide and 13 ft 4 in high at 102,195 lbs (8.69 m × 3.56 m × 4.06 m, 46,355 kg). It is an oversize load (oversize permit); permits and escorts are priced into the rate automatically. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 28 ft 6 in · 8.69 mW 11 ft 8 in · 3.56 mH 13 ft 4 in · 4.06 mAtt. 15 ft 8 inWt 102,195 lbs · 46,355 kg

Pre-filled from verified specs (2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

Oversize load, and what that means for your shipment. At 15 ft 8 in wide this machine exceeds the 8 ft 6 in legal limit on every route. Your rate includes the right trailer, permits and escorts (likely one escort), priced automatically, nothing added at pickup.

Before you book: what shippers ask

What trailer does a Caterpillar 834 need?

A multi-axle lowboy or RGN. At 13 ft 4 in tall the machine sits at 14 ft 10 in on an RGN deck and 18 ft 4 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Caterpillar 834 need oversize permits?

Yes. 15 ft 8 in of travel width exceeds the 8 ft 6 in legal limit; the quote prices permits for every state or province crossed, escorts likely one escort, and files them for the carrier.

Can a Caterpillar 834 be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Caterpillar 834 for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Caterpillar 834?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this crawler tractor ships

1. Equipment match: Multi-axle lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: oversize permit, escorts likely one escort
4. Season: weight-sensitive in spring thaw: rural pickups in Canada and the northern US may face road bans March to May, priced automatically

Operational specs

Published manufacturer figures for the base unit (Caterpillar's published specifications, source, 2026-11-01); transport dimensions above remain the planning figures.

Engine

Engine Model: Cat® C18
Net Power - SAE J1349:2011: 496 hp
Rated Speed: 1900 r/min
Peak Power Speed: 1500 r/min
Gross Power - SAE J1995:2014: 562 hp
Bore: 5.7 in
Stroke: 7.2 in
Displacement: 1105 in³

Operating Specifications

Operating Weight: 105271 lb
Blade Capacities: 7.9 – 22.2 m3 (10.3 – 29.0 yd3)

Transmission

Transmission Type: Cat planetary power shift
Forward - 1: 4.2 mile/h
Forward - 2: 7.2 mile/h
Forward - 3: 12.6 mile/h
Forward - 4: 22 mile/h
Reverse - 1: 4.2 mile/h
Reverse - 2: 7.6 mile/h
Reverse - 3: 13.3 mile/h

Hydraulic System - Lift/Tilt

Lift/Tilt System - Circuit: Pilot operated LS valve with EH
Lift/Tilt System: Variable displacement piston
Maximum Flow at 1,900 rpm: 153 gpm
Relief Valve Setting - Lift/Tilt: 4641 psi
Cylinders, Double Acting - Lift, Bore and Stroke: 139.75 mm × 1021 mm (5.5 in × 40.2 in)
Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke: 140 mm × 230 mm (5.5 in × 9.1 in)
Pilot System: Variable displacement piston
Pilot Maximum Flow: 13.7 gpm

Hydraulic System - Steering

Steering System - Circuit: Pilot, load sensing
Steering System - Pump: Piston, variable displacement
Maximum Flow: 65.8 gpm
Relief Valve Setting - Steering: 3495 psi
Total Steering Angle: 86 °
Steering Cycle Times - High Idle: 3.1 s
Steering Cycle Times - Low Idle: 5.7 s

Service Refill Capacities

Fuel Tank: 209.5 gal (US)
Cooling System: 31.7 gal (US)
Crankcase: 15.9 gal (US)
Diesel Exhaust Fluid Tank: 8.7 gal (US)
Transmission: 31.7 gal (US)
Hydraulic System Factory Fill: 63.4 gal (US)
Differential - Final Drives - Front: 49.1 gal (US)
Differential - Final Drives - Rear: 49.1 gal (US)

Air Conditioning System

Air Conditioning: The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 1.8 kg (3.9 lb) of refrigerant, which has a CO2 equivalent of 2.574 metric tonnes (2.837 tons).

Axles

Front: Fixed
Rear: Trunnion
Oscillation Angle: ±13°

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Allied Wagner CHD100 93,300 lbs
Allis Chalmers FD40 111,545 lbs
Allis Chalmers FD40B 115,260 lbs
Caterpillar 578 102,690 lbs
Caterpillar 834B 102,195 lbs
Caterpillar 834G 103,849 lbs

More Caterpillar models

Caterpillar 10 Crawler Tractors
Caterpillar 1055D Pavers
Caterpillar 112 Motor Graders
Caterpillar 11268E Motor Graders
Caterpillar 112E Motor Graders
Caterpillar 112E72H Motor Graders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.