Construction / Crawler Tractors / Caterpillar / D6N

Ship a Caterpillar D6N crawler tractor: specs verified, rate in 60 seconds

The Caterpillar D6N measures 15 ft 0 in long, 8 ft 2 in wide and 10 ft 1 in high at 35,000 lbs (4.57 m × 2.49 m × 3.07 m, 15,876 kg). It is an oversize load (oversize permit); permits and escorts are priced into the rate automatically. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 15 ft 0 in · 4.57 mW 8 ft 2 in · 2.49 mH 10 ft 1 in · 3.07 mAtt. 10 ft 7 inWt 35,000 lbs · 15,876 kg

Pre-filled from verified specs (2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

Oversize load, and what that means for your shipment. At 10 ft 7 in wide this machine exceeds the 8 ft 6 in legal limit on every route. Your rate includes the right trailer, permits and escorts (none expected), priced automatically, nothing added at pickup. Removing the attachment lets the base machine ride legal.

Before you book: what shippers ask

What trailer does a Caterpillar D6N need?

A lowboy or RGN. At 10 ft 1 in tall the machine sits at 11 ft 7 in on an RGN deck and 15 ft 1 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Caterpillar D6N need oversize permits?

Yes. 10 ft 7 in of travel width exceeds the 8 ft 6 in legal limit; the quote prices permits for every state or province crossed, escorts none expected, and files them for the carrier. Removing the attachment lets the base machine ride legal.

Can a Caterpillar D6N be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Caterpillar D6N for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Caterpillar D6N?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this crawler tractor ships

1. Equipment match: Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: oversize permit, escorts none expected
4. Season: no seasonal weight sensitivity at this weight

Operational specs

Published manufacturer figures for the base unit (LoadLoom equipment library, 2026-11-01); transport dimensions above remain the planning figures.

Ripper

Beam Cross Section: 216 mm 254 mm (8.5 in 10.0 in)
Number Of Pockets: 3
Maximum Penetration - Xl: 20.2 in
Maximum Penetration - Lgp: 15.6 in
Ripper Type: Fixed Parallelogram
Pocket Spacing: 3.3 ft in
Shank Gauge: 6.6 ft in
Shank Section: 73 mm 176 mm (2.9 in 6.9 in)

Engine

Engine Make: 2236
Engine Model: 3126 DITAAC
Net Power: 145 hp
Displacement: 433 cu in
Bore: 4.1 in
Stroke: 5.3 in
Emissions: U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 Final
Flywheel Power: 166 hp

Operational

Operating Weight: 34361 lb
Fuel Capacity: 79 gal
Cooling System Fluid Capacity: 10.8 gal
Hydraulic Fluid Capacity: 7.8 gal
Final Drives Fluid Capacity: 1.9 gal

Transmission

Number Of Forward Gears: 3
Number Of Reverse Gears: 3
Max Speed - Forward: 6.3 mph
Max Speed - Reverse: 7.4 mph
1.0 Forward: 2.1 mph
2.0 Forward: 3.6 mph
3.0 Forward: 6.1 mph
1.0 Reverse: 2.5 mph

Weights

Operating Weight: 36943 lb
Operating Weight - Lgp: 40446 lb
Shipping Weight - Lgp: 39339 lb
Operating Weight - Xl Waste Handler: 40818 lb
Operating Weight - Lgp Waste Handler: 44749 lb
Shipping Weight - Xl Waste Handler: 40029 lb
Shipping Weight - Lgp Waste Handler: 43642 lb
Shipping Weight - Xl: 36153 lb

Standard Blade

Width: 10.8 ft in
Height: 47.1 in
Capacity: 4.2 yd3
Cutting Depth: 21.2 in

Service Refill Capacities

Cooling System: 10.6 gal
Fuel Tank: 73.2 gal
Def Tank: 5 gal
Final Drive - Each: 1.8 gal
Hydraulic Tank: 7.8 gal
Engine Crankcase: 4.5 gal
Power Train: 42.3 gal
Roller Frames Xl/Lgp - Each: 20/17.5 L (4.3/4.6 gal)

Standards

Brakes: Brakes meet the standard ISO 10265:2008.
Rops: ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008.
Fops: FOPS (Falling Object Protective Structure) meets ISO 3449-2005 Level II.

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Allis Chalmers FD145 30,800 lbs
Allis Chalmers FD195L 40,746 lbs
Case 1150K 30,665 lbs
Case 1150KLGP 29,365 lbs
Case 1150KWT 28,667 lbs
Case 1150M 32,637 lbs

More Caterpillar models

Caterpillar 10 Crawler Tractors
Caterpillar 1055D Pavers
Caterpillar 112 Motor Graders
Caterpillar 11268E Motor Graders
Caterpillar 112E Motor Graders
Caterpillar 112E72H Motor Graders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.