Construction / Excavators / Case / CX300D

Ship a Case CX300D excavator: specs verified, rate in 60 seconds

The Case CX300D measures 34 ft 6 in long, 11 ft 2 in wide and 10 ft 3 in high at 67,271 lbs (10.52 m × 3.40 m × 3.12 m, 30,514 kg). It is an oversize load (oversize permit); permits and escorts are priced into the rate automatically. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 34 ft 6 in · 10.52 mW 11 ft 2 in · 3.40 mH 10 ft 3 in · 3.12 mWt 67,271 lbs · 30,514 kg

Pre-filled from verified specs (2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

Oversize load, and what that means for your shipment. At 11 ft 2 in wide this machine exceeds the 8 ft 6 in legal limit on every route. Your rate includes the right trailer, permits and escorts (none expected), priced automatically, nothing added at pickup.

Before you book: what shippers ask

What trailer does a Case CX300D need?

A lowboy or RGN. At 10 ft 3 in tall the machine sits at 11 ft 9 in on an RGN deck and 15 ft 3 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Case CX300D need oversize permits?

Yes. 11 ft 2 in of travel width exceeds the 8 ft 6 in legal limit; the quote prices permits for every state or province crossed, escorts none expected, and files them for the carrier.

Can a Case CX300D be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Case CX300D for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Case CX300D?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this excavator ships

1. Equipment match: Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: oversize permit, escorts none expected
4. Season: weight-sensitive in spring thaw: rural pickups in Canada and the northern US may face road bans March to May, priced automatically

Operational specs

Published manufacturer figures for the base unit (LoadLoom equipment library, 2026-11-01); transport dimensions above remain the planning figures.

Engine

Fuel Injection: Direct injection – electronic
Emission Tier Level: Tier 4
Fuel Filter: Replaceable, full flow spin-on cartridge
Air Filter Type: Dry type element w/ warning restriction indicator
Number Of Cylinders: 6
Engine Model: Isuzu 6 HK1X
Net Power: 154 hp
Power Measured @: 1800 rpm

Capacities

Engine Oil W/ Filter Change: 10.9 gal
Swing Drive: 0.4 gal
Fuel Tank: 120.8 gal
Hydraulic Tank: 38.9 gal
Cooling System: 9.5 gal
Def Tank: 31.8 gal
Final Drive: 2.6 gal
Hydraulic System: 79.3 gal

Operational

Arm Breakout Force: 31473.3 lb
Operating Weight: 66478.2 lb
Arm Size: 10433.1 ft in

Performance

Lift Over End 10\' Radius - Lbs (Kg): 19378.7 lb
Lift Over End Max. Reach: 9347.6 lb
Lift Over Side 10\' Radius: 19378.7 lb
Lift Over Side Max. Reach: 7032.8 lb

Swing Mechanism

Swing Speed: 10 rpm

Transmission

Max Speed: 3.4 mph

Hydraulic System

Main Pump - Maximum Flow: 128.4 gal/min
System Relief Pressure: 49.8 psi

Brakes

Brakes Type: Dual stage relief or counter balance design
Service Brake: Mechanical disc
Travel Control: SAHR disc – each motor

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Allis Chalmers FE28 60,585 lbs
Allis Chalmers FE28LC 63,450 lbs
Atlas 1704MI 55,000 lbs
Atlas 1804 68,340 lbs
Atlas 1804LC 61,600 lbs
Atlas 1804LCI 80,000 lbs

More Case models

Case 1021F Wheel Loaders
Case 1021FXR Wheel Loaders
Case 1021G Wheel Loaders
Case 1044 Excavators
Case 1080B Excavators
Case 1080D Excavators
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.