Construction / Excavators / Caterpillar / 365CL

Ship a Caterpillar 365CL excavator: specs verified, rate in 60 seconds

The Caterpillar 365CL measures 39 ft 11 in long, 11 ft 6 in wide and 15 ft 1 in high at 145,430 lbs (12.17 m × 3.51 m × 4.60 m, 65,966 kg). It is an oversize load (superload review); permits and escorts are priced into the rate automatically. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 39 ft 11 in · 12.17 mW 11 ft 6 in · 3.51 mH 15 ft 1 in · 4.60 mWt 145,430 lbs · 65,966 kg

Pre-filled from verified specs (2026-10-31). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

Oversize load, and what that means for your shipment. At 11 ft 6 in wide this machine exceeds the 8 ft 6 in legal limit on every route. Your rate includes the right trailer, permits and escorts (none expected), priced automatically, nothing added at pickup.

Before you book: what shippers ask

What trailer does a Caterpillar 365CL need?

A multi-axle lowboy or RGN. At 15 ft 1 in tall the machine sits at 16 ft 7 in on an RGN deck and 20 ft 1 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Caterpillar 365CL need oversize permits?

Yes. 11 ft 6 in of travel width exceeds the 8 ft 6 in legal limit; the quote prices permits for every state or province crossed, escorts none expected, and files them for the carrier.

Can a Caterpillar 365CL be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Caterpillar 365CL for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Caterpillar 365CL?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this excavator ships

1. Equipment match: Multi-axle lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: superload review, escorts none expected
4. Season: weight-sensitive in spring thaw: rural pickups in Canada and the northern US may face road bans March to May, priced automatically

Operational specs

Published manufacturer figures for the base unit (LoadLoom equipment library, 2026-11-01); transport dimensions above remain the planning figures.

Engine

Cylinders: 6
Number Of Cylinders: 6
Engine Make: 2236
Engine Model: C15 ACERT
Net Power: 411 hp
Power Measured @: 1800 rpm
Displacement: 928 cu in
Aspiration: Turbocharged

Operational

Operating Weight: 154037 lb
Fuel Capacity: 211 gal
Cooling System Fluid Capacity: 25 gal
Hydraulic System Fluid Capacity: 177 gal
Engine Oil Capacity: 14.3 gal
Swing Drive Fluid Capacity: 3.2 gal
Alternator Supplied Amperage: 75 amps
Hydraulic System Relief Valve Pressure: 4640 psi

Swing Mechanism

Swing Torque: 150850 lb ft
Swing Speed: 6.5 rpm

Weights

Operating Weight: 145430 lb
Operating Weight - Long Undercarriage: 145430 lb
Operating Weight - Standard Undercarriage: 145430 lb

Buckets

Reference Bucket Capacity: 3.7 yd3
Maximum Bucket Capacity: 6 yd3

Hydraulic System

Pilot System - Maximum Flow: 24 gal/min
Pilot System - Maximum Pressure: 600 psi
Maximum Pressure - Travel: 5080 psi
Maximum Pressure - Swing: 4060 psi
Swing System - Maximum Flow: 94 gal/min
Boom Cylinder - Bore: 7.5 in
Boom Cylinder - Stroke: 70.6 in
Stick Cylinder - Bore: 7.9 in

Operating Specifications

Bucket Digging Force: 57551.1 lb
Stick Digging Force: 43388.2 lb
Maximum Reach - Ground Level: 46 ft in
Maximum Bucket Capacity: 6.1 yd3
Maximum Digging Depth: 31.6 ft in

Service Refill Capacities

Cooling System: 25 gal
Final Drive - Each: 4 gal
Hydraulic Tank: 82 gal
Hydraulic System - Including Tank: 177 gal
Engine Oil: 14.3 gal
Fuel Tank Capacity: 211 gal
Swing Drive - Each: 3.2 gal

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Atlas 520MH 123,459 lbs
Bantam 1066 168,000 lbs
Bantam 866 133,500 lbs
Case CX700 151,898 lbs
Case CX700B 154,811 lbs
Case CX750D 158,300 lbs

More Caterpillar models

Caterpillar 10 Crawler Tractors
Caterpillar 1055D Pavers
Caterpillar 112 Motor Graders
Caterpillar 11268E Motor Graders
Caterpillar 112E Motor Graders
Caterpillar 112E72H Motor Graders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.