Construction / Excavators / Caterpillar / M320F

Ship a Caterpillar M320F excavator: specs verified, rate in 60 seconds

The Caterpillar M320F measures 29 ft 7 in long, 8 ft 4 in wide and 10 ft 11 in high at 46,076 lbs (9.02 m × 2.54 m × 3.33 m, 20,900 kg). It rides legal on a lowboy or RGN with no permits expected. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 29 ft 7 in · 9.02 mW 8 ft 4 in · 2.54 mH 10 ft 11 in · 3.33 mWt 46,076 lbs · 20,900 kg

Pre-filled from verified specs (2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

✓ Good news for your budget: ships legal on a lowboy or RGN. No permits, no escorts, no oversize surcharges expected.

Before you book: what shippers ask

What trailer does a Caterpillar M320F need?

A lowboy or RGN. At 10 ft 11 in tall the machine sits at 12 ft 5 in on an RGN deck and 15 ft 11 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Caterpillar M320F need oversize permits?

No. At 8 ft 4 in travel width and 46,076 lbs it rides legal on the right deck; no permits, escorts or oversize surcharges are expected.

Can a Caterpillar M320F be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Caterpillar M320F for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Caterpillar M320F?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this excavator ships

1. Equipment match: Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: none expected
4. Season: weight-sensitive in spring thaw: rural pickups in Canada and the northern US may face road bans March to May, priced automatically

Operational specs

Published manufacturer figures for the base unit (LoadLoom equipment library, 2026-11-01); transport dimensions above remain the planning figures.

Engine

Number Of Cylinders: 6
Net Power: 169 hp
Displacement: 427.8 cu in
Bore: 4.1 in
Stroke: 5.3 in
Emissions: U.S. EPA Tier 4 Final
Engine Model: Cat C7.1 ACERT
Net Power - Rated - Iso 9249/Sae J1349: 169 hp

Swing Mechanism

Swing Speed: 10.5 rpm
Swing Torque: 35403 lb ft

Transmission

Drawbar Pull: 23155 lb
Creeper Speed - 2nd Gear: 7.5 mph
Forward/Reverse - 1st Gear: 6.2 mph
Creeper Speed - 1st Gear: 1.9 mph
Forward/Reverse - 2nd Gear: 21.7 mph
Maximum Gradeability: 64%

Tires

Standard: 10.00-20 (Dual Pneumatic)
Optional: 1) 11.00-20 (Dual Pneumatic); 2) 445/70/R19.5 TL XF (Single Pneumatic); 3) 10.00-20 (Dual Solid Rubber)

Weights

Weight - Va Boom - Rear Dozer Only: 41778 lb
Weight - Va Boom - Rear Dozer, Front Outriggers: 43982 lb
Weight - One-Piece Boom - Front And Rear Outriggers: 43321 lb
Weight - One-Piece Boom - Rear Dozer, Front Outriggers: 42880 lb
Weight - Va Boom - Front And Rear Outriggers: 44423 lb
Weight - Counterweight - Optional: 9259 lb
Weight - Counterweight - Standard: 8157 lb
Weight - Sticks - Medium (2500 Mm/8'2"): 2050 lb

Hydraulic System

System: 63.4 gal (US)
Tank Capacity: 40.4 gal
Maximum Pressure - Auxiliary Circuit - High Pressure: 5076 psi
Maximum Pressure - Implement Circuit - Normal: 5076 psi
Maximum Pressure - Implement Circuit - Heavy Lift: 5366 psi
Maximum Pressure - Auxiliary Circuit - Medium Pressure: 3046 psi
Maximum Flow - Implement/Travel Circuit: 78 gal/min
Maximum Flow - Swing Mechanism: 29 gal/min

Blade

Maximum Lowering Depth From Ground: 0.5 ft in
Maximum Raising Height Above Ground: 1.6 ft in
Blade Type: Parallel
Blade Roll - Over Height: 22.7 in
Width - Standard Axles: 100.4 in
Width - Wide Axles: 108.3 in
Blade Total Height: 2.2 ft in

Service Refill Capacities

Cooling System: 12.4 gal
Diesel Exhaust Fluid Tank: 9.1 gal
Engine Crankcase: 4.9 gal
Final Drive: 0.7 gal
Powershift Transmission: 0.7 gal
Front Steering Axle - Differential: 2.8 gal
Rear Axle - Housing (Differential): 3.7 gal
Fuel Tank - Total Capacity: 109.6 gal

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

More Caterpillar models

Caterpillar 10 Crawler Tractors
Caterpillar 1055D Pavers
Caterpillar 112 Motor Graders
Caterpillar 11268E Motor Graders
Caterpillar 112E Motor Graders
Caterpillar 112E72H Motor Graders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.