Construction / Mini Excavators / Caterpillar / 308 CR

Ship a Caterpillar 308 CR mini excavator: specs verified, rate in 60 seconds

The Caterpillar 308 CR measures 22 ft 0 in long, 7 ft 7 in wide and 8 ft 4 in high at 20,771 lbs (6.71 m × 2.31 m × 2.54 m, 9,422 kg). It rides legal on a lowboy or RGN with no permits expected. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 22 ft 0 in · 6.71 mW 7 ft 7 in · 2.31 mH 8 ft 4 in · 2.54 mWt 20,771 lbs · 9,422 kg

Verified against the manufacturer's published specifications (source, 2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

✓ Good news for your budget: ships legal on a lowboy or RGN. No permits, no escorts, no oversize surcharges expected.

Before you book: what shippers ask

What trailer does a Caterpillar 308 CR need?

Flatbed, Step deck or a lowboy or RGN. At 8 ft 4 in tall the machine sits at 9 ft 10 in on an RGN deck and 13 ft 4 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Caterpillar 308 CR need oversize permits?

No. At 7 ft 7 in travel width and 20,771 lbs it rides legal on the right deck; no permits, escorts or oversize surcharges are expected.

Can a Caterpillar 308 CR be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Caterpillar 308 CR for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Caterpillar 308 CR?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this mini excavator ships

1. Equipment match: Flatbed · Step deck · Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: none expected
4. Season: no seasonal weight sensitivity at this weight

Operational specs

Published manufacturer figures for the base unit (Caterpillar's published specifications, source, 2026-11-01); transport dimensions above remain the planning figures.

Engine

Net Power: 69 hp
Engine Model: Cat® C2.8 Turbo
Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC: 69 hp
Gross Power - ISO 14396: 74.3 hp
Bore: 3.5 in
Stroke: 4.3 in
Displacement: 171 in³

Weights

Operating Weight: 20771 lb
Minimum Operating Weight with Cab*: 18754 lb
Maximum Operating Weight with Cab**: 20771 lb

Dimensions - Long Stick

Dig Depth: 182.8 in
Vertical Wall: 134 in
Maximum Reach - Ground Level: 293.7 in
Maximum Reach: 300.7 in
Maximum Dig Height: 277.1 in
Maximum Dump Clearance: 199.7 in
Boom In Reach: 126.6 in
Tail Swing with Counterweight: 62.4 in

Dimensions - Standard Stick

Dig Depth: 161.7 in
Vertical Wall: 117.8 in
Maximum Reach - Ground Level: 273.6 in
Maximum Reach: 281.1 in
Maximum Dig Height: 265.2 in
Maximum Dump Clearance: 187.4 in
Boom In Reach: 120.4 in
Tail Swing with Counterweight: 62.4 in

Weight Increase from Minimum Configuration

Counterweight: 551 lb
Counterweight (extra): 1103 lb
Long Stick: 146 lb
Steel Tracks with Pads: 752 lb
Angle Blade: 490 lb

Travel System

Travel Speed - High: 3.2 mile/h
Travel Speed - Low: 1.9 mile/h
Maximum Traction Force - High Speed: 6250 lbf
Maximum Traction Force - Low Speed: 15175 lbf
Ground Pressure - Minimum Weight: 5.4 psi
Ground Pressure - Maximum Weight: 6 psi
Gradeability - Maximum: 30 degrees

Service Refill Capacities

Cooling System: 2.6 gal (US)
Engine Oil: 2.3 gal (US)
Fuel Tank: 39 gal (US)
Hydraulic Tank: 14 gal (US)
Hydraulic System: 29 gal (US)

Hydraulic System

Type: Load Sensing Hydraulics with Variable Displacement Piston Pump
Pump Flow at 2,400 rpm: 44 gpm
Operating Pressure - Equipment: 4134 psi
Operating Pressure - Travel: 4134 psi
Operating Pressure - Swing: 3626 psi
Maximum Auxiliary Circuit - Primary - Flow at Pump: 35 gpm
Maximum Auxiliary Circuit - Primary - Pressure at Pump: 4134 psi
Maximum Auxiliary Circuit - Secondary - Flow at Pump: 9 gpm

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Case CX80 18,298 lbs
Caterpillar 307.5 18,152 lbs
Caterpillar 307.5 - Tier 4 / Stage V 17,905 lbs
Caterpillar 308D CR SB 17,306 lbs
Daewoo S75V 17,637 lbs
Doosan S75V 17,643 lbs

More Caterpillar models

Caterpillar 10 Crawler Tractors
Caterpillar 1055D Pavers
Caterpillar 112 Motor Graders
Caterpillar 11268E Motor Graders
Caterpillar 112E Motor Graders
Caterpillar 112E72H Motor Graders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.