Construction / Mini Excavators / JCB / 8025 ZTS LC

Ship a JCB 8025 ZTS LC mini excavator: specs verified, rate in 60 seconds

The JCB 8025 ZTS LC measures 14 ft 1 in long, 4 ft 11 in wide and 8 ft 1 in high at 6,246 lbs (4.29 m × 1.50 m × 2.46 m, 2,833 kg). It rides legal on a lowboy or RGN with no permits expected. Enter your route below; the dimensions are already in the form.

How this mini excavator ships

1. Equipment match: Hotshot or gooseneck · Flatbed · Step deck · Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: none expected
4. Season: no seasonal weight sensitivity at this weight

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 14 ft 1 in · 4.29 mW 4 ft 11 in · 1.50 mH 8 ft 1 in · 2.46 mWt 6,246 lbs · 2,833 kg

Pre-filled from verified specs (2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

✓ Good news for your budget: ships legal on a lowboy or RGN. No permits, no escorts, no oversize surcharges expected.

Before you book: what shippers ask

What trailer does a JCB 8025 ZTS LC need?

Hotshot or gooseneck, Flatbed, Step deck or a lowboy or RGN. At 8 ft 1 in tall the machine sits at 9 ft 7 in on an RGN deck and 13 ft 1 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a JCB 8025 ZTS LC need oversize permits?

No. At 4 ft 11 in travel width and 6,246 lbs it rides legal on the right deck; no permits, escorts or oversize surcharges are expected.

Can a JCB 8025 ZTS LC be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a JCB 8025 ZTS LC for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a JCB 8025 ZTS LC?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

Operational specs

Published manufacturer figures for the base unit (LoadLoom equipment library, 2026-11-01); transport dimensions above remain the planning figures.

Engine

Fuel: Diesel
Starter Motor: 2 Kw
Engine Model: 403D-I5
Gross Power: 28.1 hp
Net Power: 26.9 hp
Power Measured @: 2200 rpm
Displacement: 91.3 cu in
Max Torque: 70.8 lb ft

Operational

Operating Weight: 6245.7 lb
Fuel Capacity: 10.6 gal
Cooling System Fluid Capacity: 2.3 gal
Hydraulic System Fluid Capacity: 18.5 gal
Engine Oil Capacity: 1.2 gal
Operational Voltage: 12 V
Alternator Supplied Amperage: 55 amps
Hydraulic System Relief Valve Pressure: 3191 psi

Performance

Travel Speed Low: 1.5 mph
Travel Speed - High: 2.7 mph
Gradeability: 36 %

Swing Mechanism

Swing Speed: 9.6 rpm

Blade

Approach Angle: 31 degrees
Maximum Height: 1 ft in
Dig Depth (Below Ground): 1.4 ft in
Reach In Front Of Tracks: 1.2 ft in
Blade Width: 1550 mm
Blade Height: 12.6 in

Hydraulic System

Nominal Output: 27 gal/min
Slew Main Relief: 190 bar
Excavator/Track Main Relief: 220 bar
Hydraulic Motor (Travel): Piston
Auxiliary Hydraulic Flow: 15.4 gal/min
Pump Type: 2 Variable and 1 Gear

Boom

Boom Swing Left: 45 degrees
Boom Swing Right: 60 degrees
Bucket Rotation: 189 degrees
Dipper Rotation: 107 degrees
Bucket Tearout: 5395.5 lb
Dipper Tearout: 3372.2 lb
Slew Speed: 9.6 rpm

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Airman AX222 5,247 lbs
Airman AX22U-4 5,269 lbs
Airman AX253 5,578 lbs
Airman AX27U 6,459 lbs
Airman AX29U 6,570 lbs
Airman AX302 6,504 lbs

More JCB models

JCB 1105ROBOT Skid Steer Loaders
JCB 1110 Skid Steer Loaders
JCB 1110T Skid Steer Loaders
JCB 1110TRACKEDROBOT Skid Steer Loaders
JCB 135 Skid Steer Loaders
JCB 150T Skid Steer Loaders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.