Construction / Motor Graders / Champion / 750A

Ship a Champion 750A motor grader: specs verified, rate in 60 seconds

The Champion 750A measures 28 ft 2 in long, 8 ft 0 in wide and 11 ft 4 in high at 41,000 lbs (8.59 m × 2.44 m × 3.45 m, 18,597 kg). It rides legal on a lowboy or RGN with no permits expected. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 28 ft 2 in · 8.59 mW 8 ft 0 in · 2.44 mH 11 ft 4 in · 3.45 mWt 41,000 lbs · 18,597 kg

Pre-filled from verified specs (2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

✓ Good news for your budget: ships legal on a lowboy or RGN. No permits, no escorts, no oversize surcharges expected.

Before you book: what shippers ask

What trailer does a Champion 750A need?

A lowboy or RGN. At 11 ft 4 in tall the machine sits at 12 ft 10 in on an RGN deck and 16 ft 4 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Champion 750A need oversize permits?

No. At 8 ft 0 in travel width and 41,000 lbs it rides legal on the right deck; no permits, escorts or oversize surcharges are expected.

Can a Champion 750A be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Champion 750A for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Champion 750A?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this motor grader ships

1. Equipment match: Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: none expected
4. Season: weight-sensitive in spring thaw: rural pickups in Canada and the northern US may face road bans March to May, priced automatically

Operational specs

Published manufacturer figures for the base unit (LoadLoom equipment library, 2026-11-01); transport dimensions above remain the planning figures.

Engine

Number Of Cylinders: 6
Gross Horsepower: 215 hp
Engine Make: Cummins
Engine Model: LT-10-C
Net Power: 200 hp
Power Measured @: 2100 rpm
Torque Measured @: 1300 rpm
Displacement: 610.3 cu in

Operational

Std Operation Weight - Front Axle: 11950 lb
Std Operation Weight - Rear Axle: 26250 lb
Hydraulic System Fluid Capacity: 23.8 gal
Std Operation Weight - Total: 38200 lb
Oil System Fluid Capacity: 10.4 gal
Fuel Capacity: 100 gal
Cooling System Fluid Capacity: 10.8 gal
Transmission Fluid Capacity: 10.3 gal

Steering

Articulation Angle: 22 degrees
Turning Radius: 25.5 ft in

Transmission

Transmission Type: Powershift
Number Of Gears - Forward: 8
Number Of Gears - Reverse: 4
Max Speed - Forward: 24.2 mph
Max Speed - Reverse: 17.3 mph

Front Axle

Wheel Lean: 18 degrees
Oscillation - Total: 16 degrees
Ground Clearance: 2.3 ft in

Moldboard

Moldboard Width: 14 ft in
Moldboard Height: 31 in
Moldboard Thickness: 1 in

Hydraulic System

Pump Flow: 48.2 gal/min
Relief Valve Pressure: 2500 psi

Circle

Blade Ground Clearance: 1.6 ft in
Blade Cutting Depth: 2.1 ft in
Diameter: 66.7 in
Rotation: 360 degrees
Shift Left: 17.6 in
Blade Tip Angle - Front: 46 degrees
Blade Tip Angle - Rear: 13 degrees

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Allis Chalmers FG105B 39,844 lbs
Allis Chalmers FG75B 33,022 lbs
Allis Chalmers FG85B 37,002 lbs
Allis Chalmers FG95 36,615 lbs
Bell 670CH 36,393 lbs
Bell 770CH 37,265 lbs

More Champion models

Champion 100T Motor Graders
Champion 710 Motor Graders
Champion 710A Motor Graders
Champion 710ASERIESIII Motor Graders
Champion 710AVHP Motor Graders
Champion 710AVHPIV Motor Graders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.