Construction / Motor Graders / John Deere / 872D

Ship a John Deere 872D motor grader: specs verified, rate in 60 seconds

The John Deere 872D measures 28 ft 9 in long, 8 ft 7 in wide and 10 ft 4 in high at 36,210 lbs (8.76 m × 2.62 m × 3.15 m, 16,425 kg). It is an oversize load (oversize permit); permits and escorts are priced into the rate automatically. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 28 ft 9 in · 8.76 mW 8 ft 7 in · 2.62 mH 10 ft 4 in · 3.15 mAtt. 14 ft 1 inWt 36,210 lbs · 16,425 kg

Pre-filled from verified specs (2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

Oversize load, and what that means for your shipment. At 14 ft 1 in wide this machine exceeds the 8 ft 6 in legal limit on every route. Your rate includes the right trailer, permits and escorts (likely one escort), priced automatically, nothing added at pickup.

Before you book: what shippers ask

What trailer does a John Deere 872D need?

A lowboy or RGN. At 10 ft 4 in tall the machine sits at 11 ft 10 in on an RGN deck and 15 ft 4 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a John Deere 872D need oversize permits?

Yes. 14 ft 1 in of travel width exceeds the 8 ft 6 in legal limit; the quote prices permits for every state or province crossed, escorts likely one escort, and files them for the carrier.

Can a John Deere 872D be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a John Deere 872D for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a John Deere 872D?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this motor grader ships

1. Equipment match: Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: oversize permit, escorts likely one escort
4. Season: no seasonal weight sensitivity at this weight

Operational specs

Published manufacturer figures for the base unit (LoadLoom equipment library, 2026-11-01); transport dimensions above remain the planning figures.

Engine

Number Of Cylinders: 6
Net Power Gear 4-6: 230 hp
Engine Make: 2240
Engine Model: 6081H
Net Power Gear 1-2: 205 hp
Power Measured @: 2000 rpm
Net Power Gear 5-6: 245 hp
Torque Measured @: 1000 rpm

Operational

Std Operation Weight - Front Axle: 10170 lb
Std Operation Weight - Rear Axle: 26040 lb
Hydraulic System Fluid Capacity: 14 gal
Std Operation Weight - Total: 36210 lb
Max Operation Weight - Front Axle: 16023.2 lb
Max Operation Weight - Rear Axle: 32577.8 lb
Max Operation Weight - Total: 48601 lb
Fuel Capacity: 106 gal

Steering

Articulation Angle: 22 degrees
Turning Radius: 23.5 ft in

Transmission

Transmission Type: Powershift with direct drive
Number Of Gears - Forward: 8
Number Of Gears - Reverse: 8
Max Speed - Forward: 25.6 mph
Max Speed - Reverse: 25.6 mph

Front Axle

Wheel Lean: 20 degrees
Oscillation - Total: 32 degrees
Ground Clearance: 2 ft in

Moldboard

Moldboard Width: 14.2 ft in
Moldboard Height: 27.1 in
Moldboard Thickness: 1 in
Side Shift Left: 26.8 in
Side Shift Right: 26.8 in
Blade Pull At Max Weight: 43760 lb

Hydraulic System

Pump Type: Variable-displacement piston
Pump Flow: 54.7 gal/min
Relief Valve Pressure: 2750 psi

Circle

Diameter: 59.9 in
Rotation: 360 degrees
Shift Left: 31 in
Shift Right: 28.6 in
Max Reach Outside Tires - Left: 91.4 in
Max Reach Outside Tires - Right: 91 in
Max Lift Above Ground: 17.3 in
Blade Tip Angle - Front: 42 degrees

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

More John Deere models

John Deere 1010 Backhoe Loaders
John Deere 1010CLR Crawler Loaders
John Deere 1010D Four-Wheel Long Frame Forwarders
John Deere 1010D Four-Wheel Short Frame Forwarders
John Deere 1010D Six-Wheel Forwarders
John Deere 1010DFWRDR Wheel Loaders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.