Construction / Scrapers / Caterpillar / 613CSERIESII

Ship a Caterpillar 613CSERIESII scraper: specs verified, rate in 60 seconds

The Caterpillar 613CSERIESII measures 33 ft 3 in long, 8 ft 0 in wide and 10 ft 2 in high at 33,650 lbs (10.13 m × 2.44 m × 3.10 m, 15,263 kg). It rides legal on a lowboy or RGN with no permits expected. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 33 ft 3 in · 10.13 mW 8 ft 0 in · 2.44 mH 10 ft 2 in · 3.10 mWt 33,650 lbs · 15,263 kg

Pre-filled from verified specs (2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

✓ Good news for your budget: ships legal on a lowboy or RGN. No permits, no escorts, no oversize surcharges expected.

Before you book: what shippers ask

What trailer does a Caterpillar 613CSERIESII need?

A lowboy or RGN. At 10 ft 2 in tall the machine sits at 11 ft 8 in on an RGN deck and 15 ft 2 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Caterpillar 613CSERIESII need oversize permits?

No. At 8 ft 0 in travel width and 33,650 lbs it rides legal on the right deck; no permits, escorts or oversize surcharges are expected.

Can a Caterpillar 613CSERIESII be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Caterpillar 613CSERIESII for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Caterpillar 613CSERIESII?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this scraper ships

1. Equipment match: Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: none expected
4. Season: no seasonal weight sensitivity at this weight

Operational specs

Published manufacturer figures for the base unit (LoadLoom equipment library, 2026-11-01); transport dimensions above remain the planning figures.

Tractor Engine

Make: Caterpillar
Model: CAT 3116
Gross Power: 187 hp
Net Power: 175 hp
Displacement: 403 cu in

Engine

Net Power: 175 hp
Displacement: 403 cu in
Bore: 4.2 in
Stroke: 5 in
Tractor Engine: Cat 3116
Gross Power - Gears 1-2: 187 hp
Net Power - Gears 1-2: 175 hp
Net Power - Gears 3-8: 175 hp

Scraper Engine

Displacement: 402.8 cu in

Operational

Fuel Capacity: 66.1 gal
Cooling System Fluid Capacity: 10.2 gal
Engine Oil Fluid Capacity: 5.3 gal
Transmission Fluid Capacity: 9.3 gal
Differential Fluid Capacity: 5.1 gal
Hydraulic System Fluid Capacity: 26.5 gal
Wheel Coolant Fluid Capacity - Each: 1.6 gal
Tire Size: 23.5R25

Transmission

Number Of Forward Gears: 6
Number Of Reverse Gears: 1
Max Speed Forward: 21.9 mph
Max Speed Reverse: 2.2 mph
Reverse: 2.17 mile/h
1 Forward: 2.2 mph
2 Forward: 3.6 mph
3 Forward: 5.7 mph

Weights

Total Operating - Empty: 33651.4 lb
Front Axle - Empty: 21100.5 %
Rear Axle - Empty: 12551 %
Total Operating - Loaded: 60050 lb
Front Axel - Loaded: 29438.4 lb
Rear Axle - Loaded: 30613.4 %
Front Axle: 21100 lb
Rear Axle: 12550 lb

Bowl

Rated Payload: 26400.4 lb
Struck Capacity: 8.9 yd3
Max Depth Of Cut: 14.6 in
Width Of Cut: 7.8 ft in

Elevator

Number Of Flights: 15
Width - Flight Face: 6.9 in
Length - Flights: 66.1 in
Spacing Of Flights: 16 in
Length - Overall: 96 in

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Allis Chalmers Allis-Chalmers 315 27,550 lbs
Allis Chalmers FG105FG105A 39,844 lbs
Allis Chalmers FG70FG70A 32,577 lbs
Allis Chalmers TS160 28,800 lbs
Bridgeview 2470XL 30,000 lbs
Bron 5563E 35,000 lbs

More Caterpillar models

Caterpillar 10 Crawler Tractors
Caterpillar 1055D Pavers
Caterpillar 112 Motor Graders
Caterpillar 11268E Motor Graders
Caterpillar 112E Motor Graders
Caterpillar 112E72H Motor Graders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.