Construction / Skid Steer Loaders / Caterpillar / 289D

Ship a Caterpillar 289D skid steer loader: specs verified, rate in 60 seconds

The Caterpillar 289D measures 12 ft 2 in long, 6 ft 4 in wide and 6 ft 11 in high at 10,533 lbs (3.71 m × 1.93 m × 2.11 m, 4,778 kg). It rides legal on a lowboy or RGN with no permits expected. Enter your route below; the dimensions are already in the form.

How this skid steer loader ships

1. Equipment match: Hotshot or gooseneck · Flatbed · Step deck · Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: none expected
4. Season: no seasonal weight sensitivity at this weight

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 12 ft 2 in · 3.71 mW 6 ft 4 in · 1.93 mH 6 ft 11 in · 2.11 mWt 10,533 lbs · 4,778 kg

Pre-filled from verified specs (2026-10-31). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

✓ Good news for your budget: ships legal on a lowboy or RGN. No permits, no escorts, no oversize surcharges expected.

Before you book: what shippers ask

What trailer does a Caterpillar 289D need?

Hotshot or gooseneck, Flatbed, Step deck or a lowboy or RGN. At 6 ft 11 in tall the machine sits at 8 ft 5 in on an RGN deck and 11 ft 11 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Caterpillar 289D need oversize permits?

No. At 6 ft 4 in travel width and 10,533 lbs it rides legal on the right deck; no permits, escorts or oversize surcharges are expected.

Can a Caterpillar 289D be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Caterpillar 289D for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Caterpillar 289D?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

Operational specs

Published manufacturer figures for the base unit (LoadLoom equipment library, 2026-11-01); transport dimensions above remain the planning figures.

Engine

Engine Make: DIT
Engine Model: Cat C3.3B
Gross Power: 74.3 hp
Net Power: 72.9 hp
Peak Torque: 195.5 lb ft
Torque Measured @: 1500 rpm
Displacement: 203 cu in
Bore: 3.7 in

Operational

Operating Weight: 10533.7 lb
Cooling System Fluid Capacity: 3.7 gal
Fuel Capacity: 24.9 gal
Hydraulic System Fluid Capacity: 13.8 gal
Operating Voltage: 12 V
Alternator Supplied Amperage: 80 amps
Max Speed - Low Range: 4.5 mph
Max Speed - High Range: 7.1 mph

Power Train

Travel Speed - Forward Or Reverse - One Speed: 4.5 mph
Travel Speed - Forward Or Reverse - Two Speed: 7 mph

Loader

Breakout Force: 7290.7 lb
Tipping Load: 7599.4 lb

Weights

Operating Weight: 10533 lb

Hydraulic

Pump Flow: 22.8 gal/min
Relief Valve Pressure: 3335.9 psi

Hydraulic System

Hydraulic Flow - High Flow Xps - Hydraulic Power (Calculated): 76 hp
Hydraulic Flow - Standard - Loader Hydraulic Pressure: 3335 psi
Hydraulic Flow - Standard - Loader Hydraulic Flow: 23 psi
Hydraulic Flow - Standard - Hydraulic Power (Calculated): 44 hp
Hydraulic Flow - High Flow Xps - Maximum Loader Hydraulic Pressure: 4061 psi
Hydraulic Flow - High Flow Xps - Maximum Loader Hydraulic Flow: 32 gal/min

Operating Specifications

Rated Operating Capacities - 50% Tipping Load: 3800 lb
Rated Operating Capacities - 35% Tipping Load: 2660 lb
Rated Operating Capacity With Optional Counterweight: 4050 lb
Tipping Load: 7600 lb
Breakout Force - Tilt Cylinder: 7291 lb
Ground Contact Area - With 400 Mm/15.7 In Track: 2015 in2
Ground Contact Area - With 450 Mm/17.7 In Track: 2272 in2
Ground Pressure - With 400 Mm/15.7 In Track: 5.2 psi

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

ASV 4810 8,640 lbs
ASV PT100 10,150 lbs
ASV PT50 8,972 lbs
ASV PT70 8,972 lbs
ASV PT80 8,972 lbs
ASV RC100 10,150 lbs

More Caterpillar models

Caterpillar 10 Crawler Tractors
Caterpillar 1055D Pavers
Caterpillar 112 Motor Graders
Caterpillar 11268E Motor Graders
Caterpillar 112E Motor Graders
Caterpillar 112E72H Motor Graders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.