Construction / Skid Steer Loaders / Gehl / 5640E

Ship a Gehl 5640E skid steer loader: specs verified, rate in 60 seconds

The Gehl 5640E measures 10 ft 11 in long, 5 ft 7 in wide and 6 ft 9 in high at 7,610 lbs (3.33 m × 1.70 m × 2.06 m, 3,452 kg). It rides legal on a lowboy or RGN with no permits expected. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 10 ft 11 in · 3.33 mW 5 ft 7 in · 1.70 mH 6 ft 9 in · 2.06 mWt 7,610 lbs · 3,452 kg

Pre-filled from verified specs (2026-10-31). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

✓ Good news for your budget: ships legal on a lowboy or RGN. No permits, no escorts, no oversize surcharges expected.

Before you book: what shippers ask

What trailer does a Gehl 5640E need?

Hotshot or gooseneck, Flatbed, Step deck or a lowboy or RGN. At 6 ft 9 in tall the machine sits at 8 ft 3 in on an RGN deck and 11 ft 9 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Gehl 5640E need oversize permits?

No. At 5 ft 7 in travel width and 7,610 lbs it rides legal on the right deck; no permits, escorts or oversize surcharges are expected.

Can a Gehl 5640E be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Gehl 5640E for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Gehl 5640E?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this skid steer loader ships

1. Equipment match: Hotshot or gooseneck · Flatbed · Step deck · Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: none expected
4. Season: no seasonal weight sensitivity at this weight

Operational specs

Published manufacturer figures for the base unit (LoadLoom equipment library, 2026-11-01); transport dimensions above remain the planning figures.

Engine

Number Of Cylinders: 4
Engine Make: 2349
Engine Model: F4M2011
Net Power: 82 hp
Power Measured @: 2500 rpm
Displacement: 190 cu in

Operational

Operational Weight: 7380 lb
Fuel Capacity: 19.1 gal
Hydraulic System Fluid Capacity: 15.9 gal
Max Speed: 12.4 mph
Tire Size: 12.00x16.5 HD
Operating Voltage: 12 V
Alternator Supplied Amperage: 95 amps

Loader

Operating Load Rating: 2050 lb
Tipping Angle: 4100 degrees
Bucket Capacity: 0.8 yd3

Hydraulic

Pump Flow Capacity: 23 gal/min

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

ASV 2800 7,450 lbs
ASV 4810 8,640 lbs
ASV HD4500 7,450 lbs
ASV MD2800 7,450 lbs
ASV MD2810 7,450 lbs
ASV POSITRACKHD4520 7,500 lbs

More Gehl models

Gehl 1010H Telehandlers
Gehl 1044C42 Telehandlers
Gehl 1044C54 Telehandlers
Gehl 1083 Telehandlers
Gehl 10K54 Telehandlers
Gehl 1202 Excavators
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.