Construction / Wheel Loaders / Caterpillar / 910

Ship a Caterpillar 910 wheel loader: specs verified, rate in 60 seconds

The Caterpillar 910 measures 19 ft 7 in long, 8 ft 0 in wide and 9 ft 10 in high at 18,102 lbs (5.97 m × 2.44 m × 3.00 m, 8,211 kg). It rides legal on a lowboy or RGN with no permits expected. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 19 ft 7 in · 5.97 mW 8 ft 0 in · 2.44 mH 9 ft 10 in · 3.00 mAtt. 7 ft 6 inWt 18,102 lbs · 8,211 kg

Verified against the manufacturer's published specifications (source, 2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

✓ Good news for your budget: ships legal on a lowboy or RGN. No permits, no escorts, no oversize surcharges expected.

Before you book: what shippers ask

What trailer does a Caterpillar 910 need?

Step deck or a lowboy or RGN. At 9 ft 10 in tall the machine sits at 11 ft 4 in on an RGN deck and 14 ft 10 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Caterpillar 910 need oversize permits?

No. At 8 ft 0 in travel width and 18,102 lbs it rides legal on the right deck; no permits, escorts or oversize surcharges are expected.

Can a Caterpillar 910 be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Caterpillar 910 for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Caterpillar 910?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this wheel loader ships

1. Equipment match: Step deck · Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: none expected
4. Season: no seasonal weight sensitivity at this weight

Operational specs

Published manufacturer figures for the base unit (Caterpillar's published specifications, source, 2026-11-01); transport dimensions above remain the planning figures.

Weights

Operating Weight: 18102 lb

Buckets

Bucket Capacities: 1.3-3.5 m3 (1.7-4.6 yd3)
Bucket Capacities - General Purpose: 1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material: 2.5-3.5 m³ (3.3-4.6 yd³)

Engine

Maximum Gross Power: 110 hp
Rated Net Power - Rated Engine Speed: 2200 r/min
Maximum Gross Power - Rated Engine Speed: 1800 r/min
Rated Net Power - SAE J1349: 99 hp
Maximum Gross Power - ISO 14396 (metric): 112 hp
Rated Net Power - ISO 9249: 98 hp
Maximum Gross Torque - SAE J1995: 335 ft·lbf
Maximum Gross Torque - ISO 14396: 332 ft·lbf

Sustainability

Recyclability: 95%

Cab

ROPS: ISO 3471:2008
FOPS: ISO 3449:2005

Service Refill Capacities

Cooling System: 5.7 gal (US)
Fuel Tank: 43.6 gal (US)
Hydraulic System - Including Tank: 25.9 gal (US)
Hydraulic Tank: 14.5 gal (US)
Transmission: 0.8 gal (US)
Axles - Front Center Differential: 2 gal (US)
Axles - Rear Center Differential: 2 gal (US)
Engine Crankcase: 2.6 gal (US)

Steering

Maximum Working Pressure - Steering Pump: 2683 psi
Steering Articulation Angle - Each Direction: 40 °
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed: 3.2 s
Maximum Flow - Steering Pump: 17 gpm
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left: 3.75 turns

Loader Hydraulic System

Hydraulic Cycle Time - Dump, at Maximum Reach: 1.4 s
Hydraulic Cycle Time - Total Cycle Time: 12.5 s
Maximum Working Pressure - Implement Pump: 3408 psi
Relief Pressure - Tilt Cylinder: 4931 psi
Hydraulic Cycle Time - Rackback: 2.2 s
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure: 3046 psi
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift: 5.2 s
Maximum Flow - Implement Pump: 32 gpm

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Allis Chalmers 345B 16,122 lbs
Allis Chalmers Allis-Chalmers 545 16,868 lbs
Allis Chalmers FL5 16,820 lbs
Allis Chalmers FL7 19,775 lbs
Allis Chalmers FL7B 21,114 lbs
Allis Chalmers FR100 20,680 lbs

More Caterpillar models

Caterpillar 10 Crawler Tractors
Caterpillar 1055D Pavers
Caterpillar 112 Motor Graders
Caterpillar 11268E Motor Graders
Caterpillar 112E Motor Graders
Caterpillar 112E72H Motor Graders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.