Construction / Wheel Loaders / Caterpillar / 926M

Ship a Caterpillar 926M wheel loader: specs verified, rate in 60 seconds

The Caterpillar 926M measures 24 ft 5 in long, 8 ft 4 in wide and 10 ft 11 in high at 28,770 lbs (7.44 m × 2.54 m × 3.33 m, 13,050 kg). It rides legal on a lowboy or RGN with no permits expected. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 24 ft 5 in · 7.44 mW 8 ft 4 in · 2.54 mH 10 ft 11 in · 3.33 mAtt. 8 ft 4 inWt 28,770 lbs · 13,050 kg

Pre-filled from verified specs (2026-10-31). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

✓ Good news for your budget: ships legal on a lowboy or RGN. No permits, no escorts, no oversize surcharges expected.

Before you book: what shippers ask

What trailer does a Caterpillar 926M need?

A lowboy or RGN. At 10 ft 11 in tall the machine sits at 12 ft 5 in on an RGN deck and 15 ft 11 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Caterpillar 926M need oversize permits?

No. At 8 ft 4 in travel width and 28,770 lbs it rides legal on the right deck; no permits, escorts or oversize surcharges are expected.

Can a Caterpillar 926M be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Caterpillar 926M for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Caterpillar 926M?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this wheel loader ships

1. Equipment match: Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: none expected
4. Season: no seasonal weight sensitivity at this weight

Operational specs

Published manufacturer figures for the base unit (LoadLoom equipment library, 2026-11-01); transport dimensions above remain the planning figures.

Engine

Displacement: 427 cu in
Bore: 4 in
Stroke: 5 in
Emissions: Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Engine Model: Cat C7.1 ACERT
Note (1): * Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Note (3): No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note (4): Spark arrestor performance as standard Meets performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).

Operational

Operating Weight: 28770 lb

Power Train

Front Axle: Fixed
Rear Axle: Oscillating
Front Axle - Traction Aid - Standard: Locking differential
Rear Axle - Traction Aid - Optional: Limited slip differential
Note (1): Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Note (2): Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M.
Brakes - Parking: Spring applied hydraulically released
Brakes - Service: Inboard wet disc

Steering

Maximum Working Pressure - Steering Pump: 3500 psi
Steering Cylinder, Double Acting - Bore Diameter: 2.8 in
Steering Cylinder, Double Acting - Rod Diameter: 1.6 in
Steering Cylinder, Double Acting - Stroke: 17.2 in
Maximum Steering Torque - 0 Degrees (Straight Machine): 37155 lb ft
Maximum Flow - Steering Pump: 34 gal/min
Maximum Steering Torque - 40 Degrees (Full Turn): 27747 lb ft
Steering Cycle Times - Full Left To Full Right - Minimum Rpm: Pump Flow Limited: 2.8 s

Transmission

Forward And Reverse - Range 1*: 1-13 km/h (0.6-8 mph)
Forward And Reverse - Range 2: 8 mph
Forward And Reverse - Range 3: 17 mph
Forward And Reverse - Range 4: 25 mph

Buckets

Bucket Capacities: 1.9-5.0 m3 (2.5-6.5 yd3)

Operating Specifications

Full Turn Tip Load: 16587 lb

Service Refill Capacities

Cooling System: 7.9 gal
Fuel Tank: 51.5 gal
Hydraulic Tank: 23.8 gal
Hydraulic System - Including Tank: 42.3 gal
Engine Crankcase: 5.3 gal
Transmission - Gear Box: 2.2 gal
Diesel Exhaust Fluid (Def) Tank: 5 gal
Front Axles: 5.5 gal

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Al Jon 1100HY 27,283 lbs
Allis Chalmers 605SERIESB 24,402 lbs
Allis Chalmers 645B 24,402 lbs
Allis Chalmers Allis-Chalmers 645 24,402 lbs
Allis Chalmers FL10C 32,100 lbs
Allis Chalmers FL10E 30,107 lbs

More Caterpillar models

Caterpillar 10 Crawler Tractors
Caterpillar 1055D Pavers
Caterpillar 112 Motor Graders
Caterpillar 11268E Motor Graders
Caterpillar 112E Motor Graders
Caterpillar 112E72H Motor Graders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.