Construction / Wheel Loaders / Caterpillar / 930G

Ship a Caterpillar 930G wheel loader: specs verified, rate in 60 seconds

The Caterpillar 930G measures 24 ft 3 in long, 8 ft 1 in wide and 10 ft 8 in high at 29,044 lbs (7.39 m × 2.46 m × 3.25 m, 13,174 kg). It rides legal on a lowboy or RGN with no permits expected. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 24 ft 3 in · 7.39 mW 8 ft 1 in · 2.46 mH 10 ft 8 in · 3.25 mAtt. 8 ft 4 inWt 29,044 lbs · 13,174 kg

Pre-filled from verified specs (2026-10-31). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

✓ Good news for your budget: ships legal on a lowboy or RGN. No permits, no escorts, no oversize surcharges expected.

Before you book: what shippers ask

What trailer does a Caterpillar 930G need?

A lowboy or RGN. At 10 ft 8 in tall the machine sits at 12 ft 2 in on an RGN deck and 15 ft 8 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Caterpillar 930G need oversize permits?

No. At 8 ft 4 in travel width and 29,044 lbs it rides legal on the right deck; no permits, escorts or oversize surcharges are expected.

Can a Caterpillar 930G be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Caterpillar 930G for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Caterpillar 930G?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this wheel loader ships

1. Equipment match: Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: none expected
4. Season: no seasonal weight sensitivity at this weight

Operational specs

Published manufacturer figures for the base unit (LoadLoom equipment library, 2026-11-01); transport dimensions above remain the planning figures.

Engine

Engine Make: 2236
Engine Model: 366 in
Gross Power: 161 hp
Net Power: 150.2 hp
Displacement: 366.2 cu in
Bore: 4 in
Stroke: 5 in
Rated Net Power: 149 hp

Operational

Operating Weight: 27963.5 lb
Fuel Capacity: 59.5 gal
Cooling System Fluid Capacity: 10.6 gal
Engine Oil Capacity: 4.3 gal
Transmission Fluid Capacity: 9.2 gal
Front Diff Fluid Capacity: 6.9 gal
Rear Diff Fluid Capacity: 6.7 gal
Hydraulic System Fluid Capacity: 33.1 gal

Transmission

Transmission Type: countershaft
Number Of Forward Gears: 4
Number Of Reverse Gears: 3
Max Speed Forward: 23.7 mph
Max Speed Reverse: 15.6 mph
Forward - 1: 4.5 mph
Reverse - 1: 4.5 mph
2: 7.6 mph

Steering

Steering Angle - Each Direction: 40 degrees
Minimum Turning Radius - Over Tires: 207 in
Steering Cylinder, Two, Bore: 2.8 in
Hydraulic Output At 2300 Engine Rpm And 6900 Kpa (1000 Psi): 17.6 gal/min
Maximum Working Pressure: 3500 psi
Steering Articulation: 40 degrees

Weights

Operating Weight: 28725 lb
Optional Counterweight: 1036.2 lb
Maximum Weight: 29044 lb

Tires

Tread Width: 7.9 ft in
Size: 17.5-25 12PR L-2

Buckets

Bucket Capacities: 2.1 m3 - 5.0 m3 2.6 yd3 - 6.5 yd3
Bucket Width: 8.4 ft in

Hydraulic System

Pump Type: variable-displacement axial piston
Relief Valve Setting: 3756.5 psi
Pump Flow Capacity: 58.2 gal/min
Raise Time: 5 sec
Dump Time: 1.7 sec
Lower Time: 2.8 sec

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Al Jon 1100HY 27,283 lbs
Allis Chalmers 605SERIESB 24,402 lbs
Allis Chalmers 645B 24,402 lbs
Allis Chalmers Allis-Chalmers 645 24,402 lbs
Allis Chalmers FL10C 32,100 lbs
Allis Chalmers FL10E 30,107 lbs

More Caterpillar models

Caterpillar 10 Crawler Tractors
Caterpillar 1055D Pavers
Caterpillar 112 Motor Graders
Caterpillar 11268E Motor Graders
Caterpillar 112E Motor Graders
Caterpillar 112E72H Motor Graders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.