Construction / Wheel Loaders / Caterpillar / R1600H

Ship a Caterpillar R1600H wheel loader: specs verified, rate in 60 seconds

The Caterpillar R1600H measures 34 ft 0 in long, 7 ft 11 in wide and 7 ft 11 in high at 66,469 lbs (10.36 m × 2.41 m × 2.41 m, 30,150 kg). It is an oversize load (oversize permit); permits and escorts are priced into the rate automatically. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 34 ft 0 in · 10.36 mW 7 ft 11 in · 2.41 mH 7 ft 11 in · 2.41 mAtt. 8 ft 11 inWt 66,469 lbs · 30,150 kg

Verified against the manufacturer's published specifications (source, 2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

Oversize load, and what that means for your shipment. At 8 ft 11 in wide this machine exceeds the 8 ft 6 in legal limit on every route. Your rate includes the right trailer, permits and escorts (none expected), priced automatically, nothing added at pickup. Removing the attachment lets the base machine ride legal.

Before you book: what shippers ask

What trailer does a Caterpillar R1600H need?

A lowboy or RGN. At 7 ft 11 in tall the machine sits at 9 ft 5 in on an RGN deck and 12 ft 11 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Caterpillar R1600H need oversize permits?

Yes. 8 ft 11 in of travel width exceeds the 8 ft 6 in legal limit; the quote prices permits for every state or province crossed, escorts none expected, and files them for the carrier. Removing the attachment lets the base machine ride legal.

Can a Caterpillar R1600H be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Caterpillar R1600H for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Caterpillar R1600H?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this wheel loader ships

1. Equipment match: Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: oversize permit, escorts none expected
4. Season: weight-sensitive in spring thaw: rural pickups in Canada and the northern US may face road bans March to May, priced automatically

Operational specs

Published manufacturer figures for the base unit (Caterpillar's published specifications, source, 2026-11-01); transport dimensions above remain the planning figures.

Engine

Engine Model: Cat® C11
Engine Power - Tier 3 Engine - ISO 14396:2002: 271 hp
Engine Power - VR Engine - ISO 14396:2002: 271 hp
Bore: 5.1 in
Stroke: 5.5 in
Displacement: 680.4 in³

Operating Specifications

Nominal Payload Capacity: 22487 lb
Gross Machine Mass: 97453 lb
Static Tipping Load - Straight Ahead - Lift Arms Horizontal: 57110 lb
Static Tipping Load - Full Turn - Lift Arms Horizontal: 46067 lb
Breakout Force - Tilt (ISO): 39524 lb
Breakout Force - Lift (ISO): 42333 lb

Weights

Operating Mass*: 66469 lb
Operating Mass* - Front Axle: 28404 lb
Operating Mass* - Rear Axle: 38065 lb
Operating Mass + Rated Payload*: 88956 lb
Operating Mass + Rated Payload* - Front Axle: 62011 lb
Operating Mass + Rated Payload* - Rear Axle: 26944 lb

Transmission

Forward - 1: 2.8 mile/h
Forward - 2: 5.6 mile/h
Forward - 3: 10.4 mile/h
Forward - 4: 17.1 mile/h
Reverse - 1: 3.1 mile/h
Reverse - 2: 6.8 mile/h
Reverse - 3: 11.8 mile/h
Reverse - 4: 18.2 mile/h

Hydraulic Cycle Times

Raise: 7.6 s
Dump: 1.6 s
Lower, Empty, Float Down: 2 s
Total Cycle Time: 11.2 s

Bucket Capacities

Bucket Capacities: 4.2-5.9 m³ (5.5-7.7 yd³)
Dump Bucket - 1: 5.5 yd³
Dump Bucket - 2 - Standard Bucket: 6.3 yd³
Dump Bucket - 3: 7.3 yd³
Dump Bucket - 4: 7.7 yd³
Ejector Bucket: 6.3 yd³
Bolt Together Bucket: 6.9 yd³

Turning Dimensions

Outside Clearance Radius*: 261.3 in
Inner Clearance Radius*: 129.6 in
Axle Oscillation: 10°
Articulation Angle: 42.5°

Tires

Tire Size: 18 × R25

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

More Caterpillar models

Caterpillar 10 Crawler Tractors
Caterpillar 1055D Pavers
Caterpillar 112 Motor Graders
Caterpillar 11268E Motor Graders
Caterpillar 112E Motor Graders
Caterpillar 112E72H Motor Graders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.