Construction / Wheel Loaders / JCB / 426HT High Lift

Ship a JCB 426HT High Lift wheel loader: specs verified, rate in 60 seconds

The JCB 426HT High Lift measures 23 ft 9 in long, 8 ft 6 in wide and 10 ft 11 in high at 29,436 lbs (7.24 m × 2.59 m × 3.33 m, 13,352 kg). It rides legal on a lowboy or RGN with no permits expected. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 23 ft 9 in · 7.24 mW 8 ft 6 in · 2.59 mH 10 ft 11 in · 3.33 mWt 29,436 lbs · 13,352 kg

Pre-filled from verified specs (2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

✓ Good news for your budget: ships legal on a lowboy or RGN. No permits, no escorts, no oversize surcharges expected.

Before you book: what shippers ask

What trailer does a JCB 426HT High Lift need?

A lowboy or RGN. At 10 ft 11 in tall the machine sits at 12 ft 5 in on an RGN deck and 15 ft 11 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a JCB 426HT High Lift need oversize permits?

No. At 8 ft 6 in travel width and 29,436 lbs it rides legal on the right deck; no permits, escorts or oversize surcharges are expected.

Can a JCB 426HT High Lift be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a JCB 426HT High Lift for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a JCB 426HT High Lift?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this wheel loader ships

1. Equipment match: Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: none expected
4. Season: no seasonal weight sensitivity at this weight

Operational specs

Published manufacturer figures for the base unit (LoadLoom equipment library, 2026-11-01); transport dimensions above remain the planning figures.

Engine

Number Of Cylinders: 6
Engine Model: QB6.7
Gross Power: 165 hp
Net Power: 152 hp
Power Measured @: 2200 rpm
Max Torque: 540 lb ft
Torque Measured @: 1400 rpm
Displacement: 408.9 cu in

Operational

Operating Weight: 29436 lb
Fuel Capacity: 61 gal
Cooling System Fluid Capacity: 9 gal
Engine Oil Capacity: 3.7 gal
Transmission Fluid Capacity: 7 gal
Front Diff Fluid Capacity: 10.3 gal
Rear Diff Fluid Capacity: 9.8 gal
Hydraulic System Fluid Capacity: 55 gal

Transmission

Transmission Type: Smooth shift power shift
Number Of Forward Gears: 4
Number Of Reverse Gears: 3
Max Speed Forward: 23.5 mph
Max Speed Reverse: 15.6 mph

Hydraulic System

Pump Type: Twin variable displacement piston pumps
Relief Valve Setting: 3625 psi
Pump Flow Capacity: 69.8 gal/min
Raise Time: 4.4 sec
Dump Time: 1 sec
Lower Time: 2.7 sec

Bucket

Breakout Force: 31023.7 lb
Bucket Capacity - Heaped: 2.5 yd3
Bucket Capacity - Struck: 2.2 yd3

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Al Jon 1100HY 27,283 lbs
Allis Chalmers 605SERIESB 24,402 lbs
Allis Chalmers 645B 24,402 lbs
Allis Chalmers 706D 35,000 lbs
Allis Chalmers Allis-Chalmers 645 24,402 lbs
Allis Chalmers Allis-Chalmers 745 35,000 lbs

More JCB models

JCB 1105ROBOT Skid Steer Loaders
JCB 1110 Skid Steer Loaders
JCB 1110T Skid Steer Loaders
JCB 1110TRACKEDROBOT Skid Steer Loaders
JCB 135 Skid Steer Loaders
JCB 150T Skid Steer Loaders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.