Construction / Wheel Loaders / Komatsu / WA900 3E0

Ship a Komatsu WA900 3E0 wheel loader: specs verified, rate in 60 seconds

The Komatsu WA900 3E0 measures 47 ft 6 in long, 15 ft 1 in wide and 17 ft 4 in high at 236,340 lbs (14.48 m × 4.60 m × 5.28 m, 107,202 kg). It is an oversize load (superload review); permits and escorts are priced into the rate automatically. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 47 ft 6 in · 14.48 mW 15 ft 1 in · 4.60 mH 17 ft 4 in · 5.28 mWt 236,340 lbs · 107,202 kg

Pre-filled from verified specs (2026-10-31). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

Oversize load, and what that means for your shipment. At 15 ft 1 in wide this machine exceeds the 8 ft 6 in legal limit on every route. Your rate includes the right trailer, permits and escorts (likely one escort), priced automatically, nothing added at pickup.

Before you book: what shippers ask

What trailer does a Komatsu WA900 3E0 need?

A multi-axle lowboy or RGN. At 17 ft 4 in tall the machine sits at 18 ft 10 in on an RGN deck and 22 ft 4 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Komatsu WA900 3E0 need oversize permits?

Yes. 15 ft 1 in of travel width exceeds the 8 ft 6 in legal limit; the quote prices permits for every state or province crossed, escorts likely one escort, and files them for the carrier.

Can a Komatsu WA900 3E0 be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Komatsu WA900 3E0 for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Komatsu WA900 3E0?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this wheel loader ships

1. Equipment match: Multi-axle lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: superload review, escorts likely one escort
4. Season: weight-sensitive in spring thaw: rural pickups in Canada and the northern US may face road bans March to May, priced automatically

Operational specs

Published manufacturer figures for the base unit (LoadLoom equipment library, 2026-11-01); transport dimensions above remain the planning figures.

Tyres

Standard Fitment Size: 45/65-45-58PR-L-5 tubeless

Steering System

Steering System Type: Articulated type, full-hydraulic power steering
Minimum Turning Radius At The Centre Of Outside Tire: 30.2 ft in
Steering Angle: 40 degrees

Engine

Horsepower, Gross-Sae J1995: 901.2 hp
Horsepower, Net-Iso 9249: 855.6 hp
Horsepower, Net-Sae J1349: 855.6 hp
Fan Drive Method: Hydraulic
Lubrication Method: Gear pump, force-lubrication
Filter: Full-flow and bypass combined
Number Of Cylinders: 12
Engine Model: Komatsu SAA2V140E-3

Driveline

Maximum Speeds Fwd: 17.4 mph
Maximum Speeds Rev: 17.6 mph
Service Brake Type: Hydraulically actuated, wet disc brakes actuate on four wheels
Parking Brake Type: Dry disc brake
Number Of Speeds - Forward: 3
Number Of Speeds - Reverse: 3
Transmission Type: Full-powershift, planetary gear

Capacities

Fuel Tank: 410.8 gal
Cooling System: 89.1 gal
Hydraulic System: 191.6 gal
Engine Oil: 34.4 gal
Torque Converter, Transmission And Retarder Cooling: 37 gal
Axle Each (Front & Rear): 95.2 gal

Operational

Standard Bucket Capacity – Sae: 17.1 yd3
Static Tipping Load,Full Turn: 126611.5 lb
Breakout Force: 67900 kgf
Dump Clearance, @45 Degrees Dump Angle: 15.3 ft in
Dump Reach, @45 Degrees Dump Angle: 8.1 ft in
Bucket Width: 15.8 ft in
Bucket Link Type: Z-Bar
Static Tipping Load, Full Straight: 144777.6 lb

Transmission

Transmission Type: Full-powershift

Weights

Operating Weight: 236335.6 lb

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Caterpillar 992D 196,560 lbs
Caterpillar 992G 209,278 lbs
Caterpillar 992K 220,621 lbs
Komatsu WA1803PTC 228,460 lbs
Komatsu WA800-3 Tier 2 224,650 lbs
Komatsu WA800-3E0 224,651 lbs

More Komatsu models

Komatsu 25 Forklifts Cushion Tire
Komatsu 380 Farm Tractors
Komatsu 425EXL Feller Bunchers
Komatsu 430FXL Feller Bunchers
Komatsu 445FXL Feller Bunchers
Komatsu 830.3 Forwarders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.