Lifting And Material Handling / Cranes Crawler / Mantis / 9010

Ship a Mantis 9010 cranes crawler: specs verified, rate in 60 seconds

The Mantis 9010 measures 43 ft 7 in long, 12 ft 0 in wide and 10 ft 0 in high at 93,904 lbs (13.28 m × 3.66 m × 3.05 m, 42,594 kg). It is an oversize load (oversize permit); permits and escorts are priced into the rate automatically. Enter your route below; the dimensions are already in the form.

How this cranes crawler ships

1. Equipment match: Multi-axle lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: oversize permit, escorts likely one escort
4. Season: weight-sensitive in spring thaw: rural pickups in Canada and the northern US may face road bans March to May, priced automatically

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 43 ft 7 in · 13.28 mW 12 ft 0 in · 3.66 mH 10 ft 0 in · 3.05 mWt 93,904 lbs · 42,594 kg

Pre-filled from verified specs (2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

Oversize load, and what that means for your shipment. At 12 ft 0 in wide this machine exceeds the 8 ft 6 in legal limit on every route. Your rate includes the right trailer, permits and escorts (likely one escort), priced automatically, nothing added at pickup.

Before you book: what shippers ask

What trailer does a Mantis 9010 need?

A multi-axle lowboy or RGN. At 10 ft 0 in tall the machine sits at 11 ft 6 in on an RGN deck and 15 ft 0 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Mantis 9010 need oversize permits?

Yes. 12 ft 0 in of travel width exceeds the 8 ft 6 in legal limit; the quote prices permits for every state or province crossed, escorts likely one escort, and files them for the carrier.

Can a Mantis 9010 be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Mantis 9010 for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Mantis 9010?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

American 5299 104,200 lbs
Link Belt 138HSL 90,674 lbs
Link Belt LS108 85,000 lbs
Link Belt LS98 101,200 lbs
Link Belt LS98PL 101,200 lbs
Link Belt TCC450 99,500 lbs

More Mantis models

Mantis 10010 Cranes Mobile
Mantis 14010 Cranes Crawler
Mantis 2610 Cranes Crawler
Mantis 3612 Cranes Mobile
Mantis 6010 Cranes Crawler
Mantis 8012 Cranes Crawler
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.