Lifting And Material Handling / Material Handlers / Caterpillar / 330C MH Waste Handler

Ship a Caterpillar 330C MH Waste Handler material handler: specs verified, rate in 60 seconds

The Caterpillar 330C MH Waste Handler measures 36 ft 7 in long, 10 ft 6 in wide and 10 ft 9 in high at 80,265 lbs (11.15 m × 3.20 m × 3.28 m, 36,408 kg). It is an oversize load (oversize permit); permits and escorts are priced into the rate automatically. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 36 ft 7 in · 11.15 mW 10 ft 6 in · 3.20 mH 10 ft 9 in · 3.28 mWt 80,265 lbs · 36,408 kg

Pre-filled from verified specs (2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

Oversize load, and what that means for your shipment. At 10 ft 6 in wide this machine exceeds the 8 ft 6 in legal limit on every route. Your rate includes the right trailer, permits and escorts (none expected), priced automatically, nothing added at pickup.

Before you book: what shippers ask

What trailer does a Caterpillar 330C MH Waste Handler need?

A multi-axle lowboy or RGN. At 10 ft 9 in tall the machine sits at 12 ft 3 in on an RGN deck and 15 ft 9 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Caterpillar 330C MH Waste Handler need oversize permits?

Yes. 10 ft 6 in of travel width exceeds the 8 ft 6 in legal limit; the quote prices permits for every state or province crossed, escorts none expected, and files them for the carrier.

Can a Caterpillar 330C MH Waste Handler be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Caterpillar 330C MH Waste Handler for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Caterpillar 330C MH Waste Handler?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this material handler ships

1. Equipment match: Multi-axle lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: oversize permit, escorts none expected
4. Season: weight-sensitive in spring thaw: rural pickups in Canada and the northern US may face road bans March to May, priced automatically

Operational specs

Published manufacturer figures for the base unit (LoadLoom equipment library, 2026-11-01); transport dimensions above remain the planning figures.

Engine

Gross Power: 264 hp
Displacement: 537.1 cu in
Bore: 4.5 in
Stroke: 5.9 in
Net Power - Iso 9249: 247 hp
Net Power - Sae J1349: 244 hp
Engine Model: Cat C-9
Net Power - Eec 80/1269: 247 hp

Performance

Maximum Drawbar Pull: 66094 lb
High Range Maximum Travel Speed: 3.1 mph
Low Range Maximum Travel Speed: 2.1 mph
Maximum Gradeability: 70 %

Swing Mechanism

Swing Speed: 10 rpm
Swing Torque: 79657 lb ft

Weights

Operating Weight: 80265 lb
Upper: 20703 lb
Counterweight: 16576.6 lb
Undercarriage - Including Carbody: 27948 lb
Two-Piece Front - With Cylinders: 8904.5 lb
Stick: 3084.3 lb
Boom: 5820.2 lb
Operating Weight - With Riser: 82878 lb

Hydraulic System

Pilot System - Maximum Flow: 10 gal/min
Pilot System - Maximum Pressure: 597 psi
Maximum Pressure - Travel: 4900 psi
Maximum Pressure - Swing: 4046 psi
Maximum Flow - Each Of Two Pumps: 73.97 gal/min
Maximum Pressure - Implements: 4900 psi
Rotate Circuit For Grapple Maximum Flow: 13 gal/min
Rotate Circuit For Grapple Maximum Pressure: 2000 psi

Operating Specifications

Maximum Reach: 31
Cat Cab Riser: 16.25 lb/in
Maximum Pin Height: 29
Cab Height - Top Of Cab With Riser: 14.3

Service Refill Capacities

Cooling System: 10 gal
Fuel Tank: 163 gal
Final Drive - Each: 4 gal
Hydraulic Tank: 46 gal
Hydraulic System - Including Tank: 108 gal
Engine Oil: 9.4 gal
Swing Drive: 5 gal

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Atlas 350 79,366 lbs
Atlas 350MH 79,366 lbs
Case CX290DMH 72,100 lbs
Caterpillar 325DMH 78,321 lbs
Caterpillar 988DV43 Container Handler 69,000 lbs
Caterpillar M325C LMH 81,571 lbs

More Caterpillar models

Caterpillar 10 Crawler Tractors
Caterpillar 1055D Pavers
Caterpillar 112 Motor Graders
Caterpillar 11268E Motor Graders
Caterpillar 112E Motor Graders
Caterpillar 112E72H Motor Graders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.