Lifting And Material Handling / Material Handlers / Caterpillar / 345C MH

Ship a Caterpillar 345C MH material handler: specs verified, rate in 60 seconds

The Caterpillar 345C MH measures 45 ft 6 in long, 14 ft 8 in wide and 17 ft 10 in high at 126,615 lbs (13.87 m × 4.47 m × 5.44 m, 57,432 kg). It is an oversize load (superload review); permits and escorts are priced into the rate automatically. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 45 ft 6 in · 13.87 mW 14 ft 8 in · 4.47 mH 17 ft 10 in · 5.44 mWt 126,615 lbs · 57,432 kg

Pre-filled from verified specs (2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

Oversize load, and what that means for your shipment. At 14 ft 8 in wide this machine exceeds the 8 ft 6 in legal limit on every route. Your rate includes the right trailer, permits and escorts (likely one escort), priced automatically, nothing added at pickup.

Before you book: what shippers ask

What trailer does a Caterpillar 345C MH need?

A multi-axle lowboy or RGN. At 17 ft 10 in tall the machine sits at 19 ft 4 in on an RGN deck and 22 ft 10 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Caterpillar 345C MH need oversize permits?

Yes. 14 ft 8 in of travel width exceeds the 8 ft 6 in legal limit; the quote prices permits for every state or province crossed, escorts likely one escort, and files them for the carrier.

Can a Caterpillar 345C MH be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Caterpillar 345C MH for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Caterpillar 345C MH?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this material handler ships

1. Equipment match: Multi-axle lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: superload review, escorts likely one escort
4. Season: weight-sensitive in spring thaw: rural pickups in Canada and the northern US may face road bans March to May, priced automatically

Operational specs

Published manufacturer figures for the base unit (LoadLoom equipment library, 2026-11-01); transport dimensions above remain the planning figures.

Engine

Displacement: 763 cu in
Bore: 5.1 in
Stroke: 6.2 in
Net Power - Iso 9249: 345 hp
Net Power - Sae J1349: 345 hp
Engine Model: Cat C13 ACERT
Net Power - Eec 80/1269: 345 hp
Net Flywheel Power: 345 hp

Performance

Maximum Drawbar Pull: 74411.8 lb

Swing Mechanism

Swing Speed: 8.6 rpm
Swing Torque: 109900 lb ft

Weights

Operating Weight: 126615 lb
Upper: 34390 lb
Counterweight: 26455 lb
Undercarriage - Including Carbody: 46690 lb
Two-Piece Front - With Cylinders: 19080 lb
Stick: 6034 lb

Hydraulic System

Pilot System - Maximum Flow: 11.36 gal/min
Pilot System - Maximum Pressure: 596 psi
Maximum Pressure - Travel: 4982 psi
Maximum Pressure - Swing: 4554 psi
Maximum Flow - Each Of Two Pumps: 95 gal/min
Maximum Pressure - Implements: 4982 psi
Rotate Circuit For Grapple Maximum Flow: 11 gal/min
Generator Auxiliary Pump Maximum Flow: 43 gal/min

Brakes

Brake Standards: Meets the following standards: SAE J1026 APR90

Operating Specifications

Maximum Reach: 59
Generator Set: 33.5 hp
Cab Riser - Fixed: 6.5 ft in

Service Refill Capacities

Cooling System: 16 gal
Fuel Tank: 186 gal
Final Drive - Each: 4 gal
Hydraulic Tank: 64 gal
Hydraulic System - Including Tank: 150 gal
Engine Oil: 11.6 gal
Swing Drive: 2.6 gal

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Caterpillar 345B L MH 113,207 lbs
Caterpillar 345BMHII 123,420 lbs
Caterpillar MH3049 111,000 lbs
Caterpillar MH3050 110,250 lbs
Caterpillar MH3059 130,000 lbs
Caterpillar MH3250 107,700 lbs

More Caterpillar models

Caterpillar 10 Crawler Tractors
Caterpillar 1055D Pavers
Caterpillar 112 Motor Graders
Caterpillar 11268E Motor Graders
Caterpillar 112E Motor Graders
Caterpillar 112E72H Motor Graders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.