Lifting And Material Handling / Telehandlers / Caterpillar / TH514D

Ship a Caterpillar TH514D telehandler: specs verified, rate in 60 seconds

The Caterpillar TH514D measures 25 ft 3 in long, 8 ft 2 in wide and 8 ft 8 in high at 26,211 lbs (7.70 m × 2.49 m × 2.64 m, 11,889 kg). It rides legal on a lowboy or RGN with no permits expected. Enter your route below; the dimensions are already in the form.

How this telehandler ships

1. Equipment match: Step deck · Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: none expected
4. Season: no seasonal weight sensitivity at this weight

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 25 ft 3 in · 7.70 mW 8 ft 2 in · 2.49 mH 8 ft 8 in · 2.64 mWt 26,211 lbs · 11,889 kg

Pre-filled from verified specs (2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

✓ Good news for your budget: ships legal on a lowboy or RGN. No permits, no escorts, no oversize surcharges expected.

Before you book: what shippers ask

What trailer does a Caterpillar TH514D need?

Step deck or a lowboy or RGN. At 8 ft 8 in tall the machine sits at 10 ft 2 in on an RGN deck and 13 ft 8 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Caterpillar TH514D need oversize permits?

No. At 8 ft 2 in travel width and 26,211 lbs it rides legal on the right deck; no permits, escorts or oversize surcharges are expected.

Can a Caterpillar TH514D be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Caterpillar TH514D for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Caterpillar TH514D?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

Operational specs

Published manufacturer figures for the base unit (LoadLoom equipment library, 2026-11-01); transport dimensions above remain the planning figures.

Engine

Displacement: 207 cu in
Bore: 3.8 in
Stroke: 4.3 in
Emissions: *Meets U.S. EPA Tier 4 Final emission standards.
Engine Model: Cat C3.4B
Maximum Torque: 310 lb ft

Electrical

Battery: 1 12V 1,000 CCA Battery
Alternator Output: 12V/120A

Performance

Noise Levels - In Cab: 86 dB(A)
Noise Levels - External: 106 dB(A)
Off Road Towing Only: 11000 lb
Drawbar Pull: 20075 lb ft

Transmission

Transmission Type: Four (4) speed power shift
Forward - 1: 3.4 mph
Forward - 2: 6.5 mph
Forward - 3: 15.6 mph
Forward - 4: 19.2 mph
Reverse - 1: 3.4 mph
Reverse - 2: 6.5 mph
Reverse - 3: 15.6 mph

Tires

Standard: Mitas 14.00-24 16PR Air
Option (1): Goodyear 14.00-24 16PR Air
Option (2): Goodyear 14.00-24 16PR Foam

Weights

Note: *Represents machine configuration of 75 kW (100 hp/bhp) engine on standard 15.5/80-24 16 ply tires.
Operating Weight - With Carriage And Forks*: 26211 lb

Hydraulic System

Pump Type: Variable Flow, Axial Piston
System Pressure: 3770 psi
Auxiliary Hydraulic Pressure: 3481 psi
Maximum Pump Capacity: 39.8 gal/min
Auxiliary Hydraulic Flow - Boom Head - Intermittent: 25 gal/min
Auxiliary Hydraulic Flow - Boom Head - Continuous: 25 gal/min
System Type: Load Sensing, Closed Center

Axles

Front Axle: High bias, planetary reduction hubs with limited slip differential
Rear Axle: Open differential with planetary reduction hubs

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Baraga Products SS842 22,000 lbs
Bobcat T40140 22,068 lbs
Bobcat T40170 24,185 lbs
Bobcat T40180 23,787 lbs
Carelift ZB10044 28,800 lbs
Carelift ZB1004444 28,800 lbs

More Caterpillar models

Caterpillar 10 Crawler Tractors
Caterpillar 1055D Pavers
Caterpillar 112 Motor Graders
Caterpillar 11268E Motor Graders
Caterpillar 112E Motor Graders
Caterpillar 112E72H Motor Graders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.