Lifting And Material Handling / Telehandlers / Caterpillar / TL642C With Stabilizers

Ship a Caterpillar TL642C With Stabilizers telehandler: specs verified, rate in 60 seconds

The Caterpillar TL642C With Stabilizers measures 18 ft 5 in long, 11 ft 2 in wide and 7 ft 8 in high at 21,845 lbs (5.61 m × 3.40 m × 2.34 m, 9,909 kg). It is an oversize load (oversize permit); permits and escorts are priced into the rate automatically. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 18 ft 5 in · 5.61 mW 11 ft 2 in · 3.40 mH 7 ft 8 in · 2.34 mWt 21,845 lbs · 9,909 kg

Pre-filled from verified specs (2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

Oversize load, and what that means for your shipment. At 11 ft 2 in wide this machine exceeds the 8 ft 6 in legal limit on every route. Your rate includes the right trailer, permits and escorts (none expected), priced automatically, nothing added at pickup.

Before you book: what shippers ask

What trailer does a Caterpillar TL642C With Stabilizers need?

Flatbed, Step deck or a lowboy or RGN. At 7 ft 8 in tall the machine sits at 9 ft 2 in on an RGN deck and 12 ft 8 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Caterpillar TL642C With Stabilizers need oversize permits?

Yes. 11 ft 2 in of travel width exceeds the 8 ft 6 in legal limit; the quote prices permits for every state or province crossed, escorts none expected, and files them for the carrier.

Can a Caterpillar TL642C With Stabilizers be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Caterpillar TL642C With Stabilizers for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Caterpillar TL642C With Stabilizers?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this telehandler ships

1. Equipment match: Flatbed · Step deck · Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: oversize permit, escorts none expected
4. Season: no seasonal weight sensitivity at this weight

Operational specs

Published manufacturer figures for the base unit (LoadLoom equipment library, 2026-11-01); transport dimensions above remain the planning figures.

Engine

Displacement: 268.5 cu in
Bore: 4.2 in
Stroke: 5 in
Engine Model: Cat C3.4B, Tier 4 Interim
Gross Power - Basic: 100.6 hp
Maximum Torque - Standard: 302.4 lb ft

Operational

Operating Weight: 21845 lb

Tires

Standard: 370/75-28 Duraforce MT
Optional Construction: 13.00 x 24 Foam Filled or Rock Lug or Solid

Hydraulic System

Pump Type: Single-section

Axles

Manufacturer: Dana

Operator Station

Features: Vinyl suspension seat, single electronic joystick, spacious interior, ergonomic cab

Brakes

Parking Brake: Spring-applied hydraulic release on front axle
Features: Service Brakes - inboard wet disc brakes on front and rear axles; Parking Brakes- spring-applied hydraulic release on front axle

Operating Specifications

Rated Load Capacity: 6500 lb
Maximum Lift Height: 42 ft in
Maximum Forward Reach: 30 ft in
Top Travel Speed: 20.4 mph
Load At Maximum Height - Stabilizers Up: 6500 lb
Load At Maximum Height - Stabilizers Down: 6500 lb
Load At Maximum Reach - Stabilizers Up: 600 lb
Load At Maximum Reach - Stabilizers Down: 1700 lb

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Baraga Products SS842 22,000 lbs
Bobcat T35100SL 17,769 lbs
Bobcat T35120SL 18,166 lbs
Bobcat T40140 22,068 lbs
Bobcat T40170 24,185 lbs
Bobcat T40180 23,787 lbs

More Caterpillar models

Caterpillar 10 Crawler Tractors
Caterpillar 1055D Pavers
Caterpillar 112 Motor Graders
Caterpillar 11268E Motor Graders
Caterpillar 112E Motor Graders
Caterpillar 112E72H Motor Graders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.