Lifting And Material Handling / Telehandlers / JCB / 540170

Ship a JCB 540170 telehandler: specs verified, rate in 60 seconds

The JCB 540170 measures 20 ft 10 in long, 8 ft 0 in wide and 8 ft 10 in high at 26,810 lbs (6.35 m × 2.44 m × 2.69 m, 12,161 kg). It rides legal on a lowboy or RGN with no permits expected. Enter your route below; the dimensions are already in the form.

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 20 ft 10 in · 6.35 mW 8 ft 0 in · 2.44 mH 8 ft 10 in · 2.69 mWt 26,810 lbs · 12,161 kg

Pre-filled from verified specs (2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

✓ Good news for your budget: ships legal on a lowboy or RGN. No permits, no escorts, no oversize surcharges expected.

Before you book: what shippers ask

What trailer does a JCB 540170 need?

Step deck or a lowboy or RGN. At 8 ft 10 in tall the machine sits at 10 ft 4 in on an RGN deck and 13 ft 10 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a JCB 540170 need oversize permits?

No. At 8 ft 0 in travel width and 26,810 lbs it rides legal on the right deck; no permits, escorts or oversize surcharges are expected.

Can a JCB 540170 be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a JCB 540170 for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a JCB 540170?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

How this telehandler ships

1. Equipment match: Step deck · Lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: none expected
4. Season: no seasonal weight sensitivity at this weight

Operational specs

Published manufacturer figures for the base unit (LoadLoom equipment library, 2026-11-01); transport dimensions above remain the planning figures.

Engine

Number Of Cylinders: 4
Engine Make: 2257
Engine Model: JCB EcoMAX T4i/IIIB
Gross Power: 100 hp
Power Measured @: 2200 rpm
Max Torque: 313.5 lb ft
Torque Measured @: 1200 rpm
Displacement: 268.6 cu in

Operational

Operating Weight: 8818.5 lb
Fuel Capacity: 33.1 gal
Hydraulic System Fluid Capacity: 39.7 gal
Operating Voltage: 12 V
Alternator Supplied Amperage: 65 amps
Tire Size: 15.5/80-24

Transmission

Transmission Type: 4-speed powershift
Number Of Forward Gears: 4
Number Of Reverse Gears: 4
Max Speed - Forward: 15.6 mph
Max Speed - Reverse: 15.6 mph

Hydraulic System

Extend: 18.3 sec
Bucket Crowd: 4.6 sec
Retract: 16.7 sec
Max Operating Pressure: 260 bar
Main Hydraulic Pumps: 90+72 L
Raise Time: 22.7 sec
Dump Time: 4.2 sec
Lower Time: 23.4 sec

Hydraulic

Pump Flow Capacity: 42.8 gal/min
Relief Valve Pressure: 3770 psi

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Baraga Products SS842 22,000 lbs
Bobcat T40140 22,068 lbs
Bobcat T40170 24,185 lbs
Bobcat T40180 23,787 lbs
Carelift ZB10044 28,800 lbs
Carelift ZB1004444 28,800 lbs

More JCB models

JCB 1105ROBOT Skid Steer Loaders
JCB 1110 Skid Steer Loaders
JCB 1110T Skid Steer Loaders
JCB 1110TRACKEDROBOT Skid Steer Loaders
JCB 135 Skid Steer Loaders
JCB 150T Skid Steer Loaders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.