Construction / Crawler Tractors / Komatsu / D275AX5E0

Ship a Komatsu D275AX5E0 crawler tractor: specs verified, rate in 60 seconds

The Komatsu D275AX5E0 measures 29 ft 6 in long, 9 ft 6 in wide and 13 ft 1 in high at 113,600 lbs (8.99 m × 2.90 m × 3.99 m, 51,528 kg). It is an oversize load (oversize permit); permits and escorts are priced into the rate automatically. Enter your route below; the dimensions are already in the form.

How this crawler tractor ships

1. Equipment match: Multi-axle lowboy or RGN
2. Loading: Drive-on when it runs; winch when it does not
3. Permits and escorts: oversize permit, escorts likely one escort
4. Season: weight-sensitive in spring thaw: rural pickups in Canada and the northern US may face road bans March to May, priced automatically

Photo and schematic: rehosted copies only (BRD §5.3); pending the image pipeline

Machine dimensions

✎ Edit dimensions

L 29 ft 6 in · 8.99 mW 9 ft 6 in · 2.90 mH 13 ft 1 in · 3.99 mAtt. 14 ft 7 inWt 113,600 lbs · 51,528 kg

Pre-filled from verified specs (2026-11-01). Final dimensions are the shipper's responsibility; confirm with the pickup site if unsure.

Oversize load, and what that means for your shipment. At 14 ft 7 in wide this machine exceeds the 8 ft 6 in legal limit on every route. Your rate includes the right trailer, permits and escorts (likely one escort), priced automatically, nothing added at pickup.

Before you book: what shippers ask

What trailer does a Komatsu D275AX5E0 need?

A multi-axle lowboy or RGN. At 13 ft 1 in tall the machine sits at 14 ft 7 in on an RGN deck and 18 ft 1 in on a flatbed; the legal loaded height is 13 ft 6 in in the US and 13 ft 7 in in Canada.

Does a Komatsu D275AX5E0 need oversize permits?

Yes. 14 ft 7 in of travel width exceeds the 8 ft 6 in legal limit; the quote prices permits for every state or province crossed, escorts likely one escort, and files them for the carrier.

Can a Komatsu D275AX5E0 be loaded without a crane?

Yes when it starts and drives: it loads under its own power on the trailer's ramps. If it is inoperable, toggle starts-and-drives off in the form; winch loading is priced in, never added at pickup.

How should I prepare a Komatsu D275AX5E0 for pickup?

Empty the bucket or bed, fold and secure loose parts, note fluid leaks, and confirm the dimensions against the machine as it sits: debris, unfolded attachments or missing counterweights change weight and price.

What does it cost to ship a Komatsu D275AX5E0?

Distance and the trailer class drive the price once the dimensions are set. Enter pickup and drop-off below; the rate is free, bookable and locked for 30 days.

Operational specs

Published manufacturer figures for the base unit (LoadLoom equipment library, 2026-11-01); transport dimensions above remain the planning figures.

Steering System

Minimum Turning Radius: 12.8 ft in

Engine

Horsepower, Gross-Sae J1995: 452 hp
Horsepower, Net-Iso 9249: 449.3 hp
Horsepower, Net-Sae J1349: 449.3 hp
Fan Drive Method: Hydraulic
Lubrication Method: Gear pump, force lubrication
Filter: Full flow
Number Of Cylinders: 6
Engine Make: 2238

Driveline

Maximum Speeds Fwd: 7 mph
Maximum Speeds Rev: 9.3 mph
Transmission: Torqflow
Number Of Speeds - Forward: 3
Number Of Speeds - Reverse: 3
Steering: Hydrostatic Steering System

Capacities

Transmission, Bevel Gear, And Steering System: 23.8 gal
Fuel Tank: 222 gal
Final Drive: 10.6 gal
Engine Oil: 13.8 gal
Coolant: 26.5 gal

Operational

Blade Capacity: 18 yd3
Blade Type: Semi-U (dual tilt)
Blade Length: 169.3 in
Blade Height: 77.2 in
Blade Cut Depth: 25.2 in
Ripper Type: Adjust
Ripper Depth: 35.5 in

Transmission

Transmission Type: Torqflow

Weights

Operating Weight: 114688.9 lb
Ripper Weight: 9837.1 lb
Blade Weight: 16667 lb

Hydraulic System

Hydraulic System Type: Closed-center Load Sensing System (CLSS)

🚜 Heavy equipment quote🔒 PriceLock 30

1 · Your machines

Ⓐ Length?The longest point of the machine from front to back, including anything that sticks out (forks, blade, counterweight).

ftinch

Ⓑ Width?The widest point of the machine BODY, left to right. Don't count the attachment here, that goes in Ⓓ.

ftinch

Ⓓ Attachment width?Width of the bucket, blade, or boom if it's wider than the machine body.

ftinch

Ⓔ Angled width?If the blade or attachment can be turned/angled for transport, enter its width when angled. We price on this narrower width.

ftinch

Weight?Total operating weight including attachments. Check the spec plate on the machine or the operator's manual.

lbs

Starts and drives??Starting and driving are different things: the machine must start AND move under its own power onto the trailer. If it starts but cannot drive, answer No. Non-runners need a winch-equipped trailer (surcharge applies). Loading assistance is not included in any quote; the driver loads with the truck's own equipment only.

Value of the shipment *?What would it cost to replace this cargo today? Your declared value sets your protection options and prints into your agreement.

2 · Your route

route draws live as both fields fill in

Pickup locationDrop-off location

🔒 free · no signup · locked 30 days

Your shipment is protected

🛡️ $5M general liability coverage

Every assigned carrier

additional $2M+ · cargo up to $1M

Real reviews

★★★★★ 4.9

Licensed freight forwarder FF-53801 · USDOT 3852466, verify us on FMCSA ↗ · $75,000 BMC-84 bond on file · FMCSA status: active

Recent quotes

◆ Raleigh, NC$1,800 – $2,000

Heavy equipment · 2 min ago

◆ Houston, TX$1,100 – $1,300

Pallets LTL · 11 min ago

◆ Albuquerque, NM$3,200 – $3,500

Moving · 1 hr ago

Similar machines (same class, within 20% weight)

Allied Wagner CHD100 93,300 lbs
Allis Chalmers FD40 111,545 lbs
Allis Chalmers FD40B 115,260 lbs
Allis Chalmers FD50 127,325 lbs
Caterpillar 578 102,690 lbs
Caterpillar 834 102,195 lbs

More Komatsu models

Komatsu 25 Forklifts Cushion Tire
Komatsu 380 Farm Tractors
Komatsu 425EXL Feller Bunchers
Komatsu 430FXL Feller Bunchers
Komatsu 445FXL Feller Bunchers
Komatsu 830.3 Forwarders
All equipment specs

Specifications are provided for transport planning purposes only and reflect standard base configurations as published by equipment manufacturers and industry sources. Actual dimensions and weights vary by configuration, options, attachments, and condition. LoadLoom does not guarantee the accuracy or completeness of published specifications. Confirming final dimensions and weight is the responsibility of the shipper; misdeclared dimensions may result in adjusted pricing, delays, or refused pickup. Legal load limits, permit requirements, and escort rules vary by state and province and are subject to change; permit and escort estimates are informational until confirmed at booking. Coverage is subject to declared value and the terms of the LoadLoom booking contract. Images and schematics are illustrative and may not depict the exact model or configuration listed. See PriceLock terms and the LoadLoom Terms and Conditions. Report an incorrect spec.